Pico Technology Oscilloscope Probe, Probe Type: Active 2.5GHz 20V

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Pico TETRIS 2500 2.5GHz High Impedance Active Probe TA223, 10:1

Pico TETRIS® active probe is a unique inline probing system. The unique design of the TETRIS 2500 allows for contact to adjacent square pins in 2.54mm pitch simultaneously. This is possible because the T-shaped probe housing allows many probes to be positioned next to each other, permitting multiple measurements to be taken at the same time. The TETRIS 2500 is independent of any particular system and, with its standard BNC connector, can be plugged into any measuring instrument with a 50Ω input. With an input resistance of 1MΩ and an input capacitance of 0.9pF, the TETRIS 2500 probe is suitable for measurements in all frequency ranges. Unlike passive probes, the TETRIS 2500 active probe offers a high input impedance into the GHz range. Its characteristics make it suitable for most daily measurements. If the measuring instrument does not have 50Ω coupling, an external 50Ω terminator such as a TA051 ( 898-6791 ) can be used, in which case the system bandwidth may be reduced.

Attenuation 10:1
Input impedance 1MΩ ll 0.9pF
Input coupling of the measuring instrument 50Ω
Probe bandwidth (-3 dB) 2.5GHz
System bandwidth (-3 dB) 2GHz (with >500MHz oscilloscope)
Input dynamic range ±8V
Maximum input voltage 20V
Cable length 1.3 m

Supplied with

Power supply

Specificaties
Kenmerk Waarde
Probe Type Active
Attenuation 1:10
Bandwidth 2.5GHz
Maximum Common Mode Input Voltage 20V
Connector Type BNC Adapter, SMA
Number of Probes 2
Safety Category Voltage 20V
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
1.820,70
(excl. BTW)
2.203,05
(incl. BTW)
Aantal stuks
Per stuk
1 +
1.820,70 €
Related Products
Compact, ergonomically designed probes (non-modular) for oscilloscopesIntegral compensation ...
Description:
Compact, ergonomically designed probes (non-modular) for oscilloscopesIntegral compensation trimmerCable length 1.2m Termination 50Ω BNCVoltage category IEC1010-2-031 300V Cat 1Test voltage 1150VFor accessories kit ( 1 screw driver, 1 BNC adaptor, 1 ground lead, 1 test clip, 1 needle ) see ...
An indispensable accessory for analogue or digital oscilloscopes ...
Description:
An indispensable accessory for analogue or digital oscilloscopes to visualise signals that are not referenced to the ground!A range of three models to fulfil different requirements.1 or 2 input channels.Coaxial or banana measuring leads/long length banana leads.A model with coaxial ...
An indispensable accessory for analogue or digital oscilloscopes ...
Description:
An indispensable accessory for analogue or digital oscilloscopes to visualise signals that are not referenced to the ground!A range of three models to fulfil different requirements.1 or 2 input channels.Coaxial or banana measuring leads/long length banana leads.A model with coaxial ...
Rated voltage of probe:. Highly flexible 1.2m coaxial ...
Description:
Rated voltage of probe:. Highly flexible 1.2m coaxial cable with BNC plugCompensation adjusting screwø 2 mm safety socket for reference connectionIsoprobe® II 10:1 250MHz probePush-on ø 4 mm test probe (1000 V, CAT II)Push-on safety jaw crocodile clip (1000 V, ...