Keysight Technologies N28XXA/B Series N2890A Oscilloscope Probe, Passive Type, 500MHz, 1:10, BNC Connector

Low-cost general-purpose probes featuring a high input resistance for low probe loading. They can be adjusted for low-frequency and high-frequency compensation.

These probes provide a 10:1 attenuation ratio except for the N2889A which has a switch in the probe handle for switching the attenuation ratio between 1:1 (35ns rise time) and 10:1 (1ns rise time)

retractable hook, adjustment tools (2 with N2889A/90A, 1 with N2862B/63B), insulating cap, IC insulating cap, identification tags, probe tip (2), ground spring, BNC adapter, ground lead (black 12cm)

The Keysight Technologies low-cost passive oscilloscope probe provides up to 500MHz bandwidth and features a high input resistance of 10Mohm to address a wide range of measurement needs with low probe loading. This probe can be adjusted for low-frequency compensation and high-frequency compensation. This probe is compatible with Keysight InfiniiVision and Infiniium Series oscilloscopes with 1MΩ input.

• Bandwidth is DC to 500MHz (–3dB)
• Attenuation ratio is 10:1
• Cable length is 1.3M
• Input impedance is 10Mohm ll11pF each side to ground
• Maximum input is 300V RMS (or >400Vpk) CAT I and CAT II

• IEC-61010-031:2002

Agilent InfiniiVision and Infiniium Series oscilloscopes with 1MΩ input

Passive Oscilloscope Probes

All the products in this range are supplied for use with instruments with a permanent earth connection.