Pico Technology PP877 Oscilloscope Adapter, For Use With Oscilloscope

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Pico Three Axis Accelerometer and Oscilloscope Interface PP877

Pico Technology supplies accelerometers that connect to an oscilloscope for measuring noise and vibration. The Pico PP877 is a MEMS-based three-axis accelerometer and oscilloscope interface. It is supplied with 3 short BNC to BNC cables which plug directly into any PicoScope oscilloscope with 3 or more analog channels. The PP877 is particularly recommended for use with high-resolution oscilloscopes such as the PicoScope 4000 Series, in order to take advantage of their increased sensitivity.

± 5 g measurement range (measurable acceleration)
DC to 350 Hz vibration frequency range
Output BNC 0-2 V DC coupled
Output scaling 99 to 122 mV/g
0 g output (all axes) 0.85 to 1.15 V
BNC overvoltage protection 30 V
Shock survivability (sensor head) 10,000 g
Thread mounting (sensor) " x 28 UNF
Temperature range (operating) sensor head -40 to +85 °C
Dimensions 105 x 65 x 27 mm (sensor interface including BNCs), 12 mm x 18 mm diameter (magnet, including fitted grub screw)
Weight 120 g (interface), 80 g (vibration sensor)

Approvals

EN61326-1:2006

Supplied with

Mounting magnet, BNC to BNC cables (x3), battery (lithium primary cell) CR123(A)

Specificaties
Kenmerk Waarde
Accessory Type Three-Axis Accelerometer Kit
For Use With Oscilloscope
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
349,00
(excl. BTW)
422,29
(incl. BTW)
Aantal stuks
Per stuk
1 +
349,00 €
Related Products
Using hybrid technology that includes a Hall-effect sensor ...
Description:
Using hybrid technology that includes a Hall-effect sensor and an AC current transformer, the probes provide accurate measurement of DC,or AC currents up to 500 Arms (for model N2780A) or DC–100 MHz (for model N2783A), without breaking into the circuit. ...
The PM8907/830 is a universal mains-power adapter (the ...
Description:
The PM8907/830 is a universal mains-power adapter (the Adapter or Product) for measurement, control, and laboratory equipment. The Adapter is intended to operate and charge the 120-Series ScopeMeter Test Tool, 43B Power Quality Analyzer, and other products that require the ...
HX0030: PROBIX 1/10 probe 250 MHz 1000 V.HX0031: ...
Description:
HX0030: PROBIX 1/10 probe 250 MHz 1000 V.HX0031: PROBIX BNC adapter.HX0032: PROBIX 50 Ohm adapter.HX0033: PROBIX banana adapter.HX0034: PROBIX probe 10 mA → 80A / 100 KHz.HX0035: PROBIX type K thermocouple adapter.HX0038: carry case.HX0039: Ethernet straight cable.HX0040: Ethernet twisted cable.HX0041: ...
Fluke PM9081 consists of two adapters. One red ...
Description:
Fluke PM9081 consists of two adapters. One red (signal) and one black (ground) 4-mm banana contact. Converts test equipment with BNC plug into banana plugs for use with digital multimeters. Maximum Signal Voltage: 600V rmsMaximum Voltage to Ground: 600V rmsCAT ...