Pico Technology PR121 Thermocouple Terminal Board

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Pico Technology Thermocouple Terminal Board

The Pico Technology single-channel thermocouple terminal board allows wires to be attached to the data logger without soldering. The four input ranges (±50mV, ±500 mV, ±5 V and 4–20 mA) allow a wide range of other sensors and signals to be measured. The terminal board is designed to use with the USB TC-08 and is not guaranteed to work with other thermocouple data loggers. It plugs into a channel on the Pico TC-08 data logger and turns it into a 20-bit high-resolution data logger.

Specificaties
Kenmerk Waarde
Accessory Type Thermocouple Data Logger
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
91 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
26,00
(excl. BTW)
31,46
(incl. BTW)
Aantal stuks
Per stuk
1 +
26,00 €
Related Products
Gold-plated terminals, iGrid 2.0 connectors support higher electrical ...
Description:
Gold-plated terminals, iGrid 2.0 connectors support higher electrical conductivity for a variety of data, industrial and consumer wire-to-board applications. 10-color polarization optionsInternal positive lockHigh header housing wallApplicationsTelecommunications / ... MachineVending MachineHome ...
The N2784A single arm probe positioner (134-6160) and ...
Description:
The N2784A single arm probe positioner (134-6160) and N2785A 2-arm probe positioner (134-6162) provide quick and stable X-Y positioning with only a “lift and drop” motion to put the probe in place for PC boards and devices that require hands-free ...
The Teledyne LeCroy HVFO103 (RS 136-8330) is a ...
Description:
The Teledyne LeCroy HVFO103 (RS 136-8330) is a high voltage (HV) fibre-optically isolated 60MHz oscilloscope probe that is designed for the measurement of small signals floating on a high voltage bus in power electronics designs. Optical isolation between the probe ...
The Teledyne LeCroy RP4030 Power Rail Probe meets ...
Description:
The Teledyne LeCroy RP4030 Power Rail Probe meets the specific requirements of those who need to acquire a low-voltage DC signal.The RP4030 will faithfully acquire a low-impedance, low-voltage DC power/voltage rail signal without unduly loading the device under test (DUT), ...