Pico Technology,Differential Oscilloscope Kit

  • RS-stocknr. 136-5309
  • Fabrikantnummer PicoScope 4444 1000 V CAT III kit
  • Fabrikant Pico Technology
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Pico Technology Differential Oscilloscope Kit

The Pico Technology PICOSCOPE 4444 1000 V CAT III Kit is a 20Mhz high-resolution differential oscilloscope with three passive differential voltage probes and one TA271 single-ended D9-BNC adaptor. Its intelligent probe interface automatically configures the PicoScope display to probes. The four D9 inputs allow you to make true differential measurements. The 12bit resolution of the PicoScope 4444 offers 16 times as much vertical detail.
The PicoScope 4444 uses specially designed passive voltage probes that have smaller and lighter (or no) interface boxes. The PicoScope 4444 has high-resolution and deep memory and lets you make multiple differential measurements at the same time, while never occupying more than one power socket. Its intelligent probe interface automatically configures the PicoScope display to your probes, so you don’t have to.

Features and Benefits

It has 4 channel device
waveform buffer and navigator Hardware acceleration engine (HAL3)
Deep memory is 256 MS
Up to 400 MS/s sampling rate
High common-mode rejection ratio
Flexible 12 and 14bit resolution
Balanced high-impedance inputs for a low circuit load
Low voltage probe for millivolts to 50V
True differential measurements in high-resolution
FFT spectrum analyser
Intelligent probe interface
High-resolution offers 64x more detail

Applications

Non-ground referenced measurements
Safe probing of single phase and 3-phase voltages and currents
Measuring power drawn by mobile and IoT devices
Hybrid and electric vehicle design
Motor drives and inverters

Certifications

EN 61010-1:2010
EN 61326-1:2013
FCC Part 15 Subpart B

Specificaties
Kenmerk Waarde
Model Number PQ074
For Use With PicoScope 4444 Differential Oscilloscope
Kit Type Differential Oscilloscope Kit
Kit Contents High-Resolution Differential Oscilloscope, PicoConnect 442 1000 V CAT III Passive Differential Voltage Probes x 3, TA271 Single Ended D9-BNC Adapter
Dimensions 190 x 170 x 40mm
Height 40mm
Length 190mm
Width 170mm
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
1.625,00
(excl. BTW)
1.966,25
(incl. BTW)
Aantal stuks
Per stuk
1 +
1.625,00 €
Related Products
The PicoScope 2000 offers excellent performance and value. ...
Description:
The PicoScope 2000 offers excellent performance and value. It is an extremely versatile all-in-one full-function oscilloscope, spectrum analyser, signal generator and arbitrary waveform generator (AWG). It has a compact footprint of 100 x 135 mm and fits neatly into a ...
Compact, ergonomically designed probes (non-modular) for oscilloscopesIntegral compensation ...
Description:
Compact, ergonomically designed probes (non-modular) for oscilloscopesIntegral compensation trimmerCable length 1.2m Termination 50Ω BNCVoltage category IEC1010-2-031 300V Cat 1Test voltage 1150VFor accessories kit ( 1 screw driver, 1 BNC adaptor, 1 ground lead, 1 test clip, 1 needle ) see ...
From Fluke, this SCC190 kit includes vital accessories ...
Description:
From Fluke, this SCC190 kit includes vital accessories for the Fluke 190 Scopemeter. • The C190 Protective Hard Shell Carry Case ensures your equipment is well protected during transportation. This briefcase-style carry case is made from durable polypropylene and includes ...
This standard accessory kit is used with all ...
Description:
This standard accessory kit is used with all WaveAce Passive Probes (PP013, PP014, PP015, PP016). Kit contains: standard ground lead; sprung hook; colour coding rings (x2 sets); adjustment tool; ground attachment; replacement probe tip (x2); BNC adaptor; IC test tip ...