Murrelektronik Limited Optocoupler, Max. Forward 5 (Off) V dc, 53 (On) V dc, Max. Input 10 MA, 78mm Length,

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CZ
Productomschrijving

MIRO TR DIN Rail Optocoupler

MIRO TR Optocouplers are used to combine different signal levels or to isolate one signal from another. They provide an optoelectronic signal transfer between input and output, and therefore, never wear out.

• DIN Rail mounting
• Compact, 6.2 mm width
• Made to last
• No mechanical wear
• Silent operation
• No contact bounce times
• Short switching times
• Models with switching frequencies up to 500 kHz
• Shock and vibration resistant
• Low input power
• LED (yellow) input display
• Spring clamp or screw terminals

Specificaties
Kenmerk Waarde
Maximum Forward Voltage 5 (Off) V dc, 53 (On) V dc
Maximum Input Current 10 mA
Isolation Voltage 2.75kV
Rise Time 2ms
Pin Count 4
Mounting Style DIN Rail
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
Length 78mm
Width 6.2mm
Depth 70mm
Dimensions 78 x 6.2 x 70 mm
Input Type LED
Operating Temperature Range -20 → +60 °C
Output Type Phototransistor
21 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
48,14
(excl. BTW)
58,25
(incl. BTW)
Aantal stuks
Per stuk
1 +
48,14 €
Related Products
Output coupler Relay coupler, 1 change-over contact 24 ...
Description:
Output coupler Relay coupler, 1 change-over contact 24 V AC/DC Overall width 6.2 mm Spring-type terminal (push-in) Thermal current 6A.
Output coupler with plug-in Relay, 1 change-over contact ...
Description:
Output coupler with plug-in Relay, 1 change-over contact Spring-type terminal (push-in) 230 V AC/DC Enclosure width 6.2 mm Thermal current 6A.
PLC Interface single- and double-pole relays, and opto-couplers, ...
Description:
PLC Interface single- and double-pole relays, and opto-couplers, having the same profile. This allows the modules to be installed in any configuration with a common bridging system and using the same accessories. The V8 adapter connects 8 relays or opto-couplers ...
EMG-OV power opto couplers are used as the ...
Description:
EMG-OV power opto couplers are used as the modular interface in all industrial fields for signal amplification to 230V / 3A and for electrical isolation.Input and output end suppressors, integrated operating display and a 3.5 kV test voltage ensure maximum ...