Phoenix Contact Optocoupler, Max. Forward 24 V, Max. Input 50 MA DIN Rail Mounting Style

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

PSR Mini PS40 Optocouplers

The PSR Mini PS40 Optocoupler is a coupling relay that can be used for power adaptation and electrical isolation in high and low-demand applications up to SIL 3. When using this module, circuits are interrupted in a safety-orientated manner.

Used for applications up to SIL 3 according to IEC 61508 & EN 61511
Used for safety-related switching off
6.8mm housing width
Approved for Class l, Zone 2 applications
Readback of field devices possible
Integrated DCS test pulse filter
Low inrush current
1 undelayed enabling current path
1 digital signal output
Fixed screw connection

Standards

IEC 61508, EN 61511

Specificaties
Kenmerk Waarde
Maximum Forward Voltage 24 V
Maximum Input Current 50 mA
Rise Time 2ms
Mounting Style DIN Rail
Minimum Operating Temperature -40°C
Maximum Operating Temperature +70°C
Width 6.8mm
Depth 102.5mm
Special Features Approved for Class I, Long Service Life to Filtering of Controller Test Pulses, Zone 2 Application
Dimensions 6.8 x 93.1 x 102.5 mm
Series PSR-PS40-1NO-1DO-24DC-SC
Operating Temperature Range -40 → +70 °C
Input Type DC
Output Type Digital, PNP
2 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
91,31
(excl. BTW)
110,49
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
91,31 €
5 - 9
87,61 €
10 +
83,84 €
Related Products
EMG-OV power opto couplers are used as the ...
Description:
EMG-OV power opto couplers are used as the modular interface in all industrial fields for signal amplification to 230V / 3A and for electrical isolation.Input and output end suppressors, integrated operating display and a 3.5 kV test voltage ensure maximum ...
The SIRIUS 3TX7 narrow design interface relays are ...
Description:
The SIRIUS 3TX7 narrow design interface relays are coupling elements used to connect control signals to and from a PLC. Coupling device (interface) as a connector moduleControl and peripheral motor protectionEquipment: DIN VDE 0110, DIN VDE 0435, DIN VDE 0660 ...
In order to fit voltage/current together with galvanic ...
Description:
In order to fit voltage/current together with galvanic insulation, interface is necessary through devices providing these functions plus transmission of input/output logic signals.,The R600 range of relays and optocouplers makes it possible. These devices provide many voltage and current adjustments ...
Opto-couplers switch using semiconductors. These are not subject ...
Description:
Opto-couplers switch using semiconductors. These are not subject to wear as welding is not possible. Output coupling elements with semiconductorNarrow widthApplication at high number of switching cyclesScrew connectionGalvanic separation.