Phoenix Contact Optocoupler, Max. Forward 24 V, Max. Input 6 mA, 80mm Length, DIN Rail Mounting Style

Datasheets
Wetgeving en conformiteit
Niet conform
Land van herkomst: DE
Productomschrijving

Phoenix Contact Opto-Couplers with Solid State Relay Output

These DIN rail mount opto-couplers from Phoenix Contact provide an ideal means of interfacing on/off signals to, or from, equipment, whilst providing electrical isolation between their own inputs and outputs. In other words, these may be used to protect equipment by electrically isolating its inputs, outputs, or both. The dc/ac and ac/dc versions also provide a means of interfacing (whilst isolating) ac and dc control voltages.

Features and Benefits

• Dc in/Dc out, Dc in/Ac out and Ac in/Dc out versions available
• Versions with switching speeds up to 100kHz available
• 2.5kVac input to output isolation
• LED status indication
• Module width 6.2mm
• Operating temperature range: -20 to +60°C

Standards

IEC 60 664, IEC 60 664A, DIN VDE 0110

DEK-OE-24DC/24DC/100KHZ

An Input solid-state relay for DIN rail mounting, with yellow LED display and includes signal inputs on PLC counter boards.

Features and Benefits

• Reverse polarity and surge protection
• Screw connection
• Capacitor on the input side for interference suppression
• M3 thread

Note

Use of EB 80-DIK... bridges in the DEK terminal blocks: Absorption of humidity from the ambient air as well as an unfavourable tolerance between a larger number of DEK terminal blocks and the EB 80-DIK... bridge may cause (minor) expansion of the DEK housing. When the EB 80-DIK... bridges are used, therefore, it is recommended that these be disconnected after about 10 to 12 DEK terminal blocks and a wire bridge to the next DEK terminal block be inserted in their place.

Specificaties
Kenmerk Waarde
Maximum Forward Voltage 24 V
Maximum Input Current 6 mA
Isolation Voltage 2.5kV
Mounting Style DIN Rail
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
Length 80mm
Width 6.2mm
Depth 56mm
Series DEK-OE- 24DC/24DC/100KHZ
Dimensions 56 x 80 x 6.2 mm
Operating Temperature Range -20 → +60 °C
51 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
14 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
39,13
(excl. BTW)
47,35
(incl. BTW)
Aantal stuks
Per stuk
1 +
39,13 €
Related Products
The Finder 22 series DIN rail mount non-latching ...
Description:
The Finder 22 series DIN rail mount non-latching relay has contact configuration of SPNO. It is actuated with 24VDC coil voltage and 20A switching current. This modular monostable relay is equipped with 20A, 250VAC cadmium-free contacts rated at 5000V AC1. ...
The Omron G2RV series single-pole DIN-rail mount non-latching ...
Description:
The Omron G2RV series single-pole DIN-rail mount non-latching relay has a contact configuration of SPDT. It is actuated with 24VDC coil voltage and 6A switching current. Its flexible design allows efficient wiring inside the panels. The push-in plus terminal blocks ...
The Wago 857 series single-pole DIN rail mount ...
Description:
The Wago 857 series single-pole DIN rail mount miniature switching relay has a single changeover contact. It is actuated with a 24VDC coil and 6A switching current. This relay offers superior control to electronic devices during high power conditions. Operating ...
Package consists of relay, DIN rail socket, module, ...
Description:
Package consists of relay, DIN rail socket, module, retainer and marking tabMechanical and electrical indicatorManual test tabDC versions complete with LED & protection diode moduleAC versions complete with LED & varistor moduleDIN socket has logical arrangement of control/load terminals, with ...