Phoenix Contact Optocoupler, Max. Forward 5 V, Max. Input 7 mA, 80mm Length, DIN Rail Mounting Style

Datasheets
Wetgeving en conformiteit
Niet conform
Land van herkomst: CN
Productomschrijving

Phoenix Contact Opto-Couplers with Solid State Relay Output

These DIN rail mount opto-couplers from Phoenix Contact provide an ideal means of interfacing on/off signals to, or from, equipment, whilst providing electrical isolation between their own inputs and outputs. In other words, these may be used to protect equipment by electrically isolating its inputs, outputs, or both. The dc/ac and ac/dc versions also provide a means of interfacing (whilst isolating) ac and dc control voltages.

Features and Benefits

• Dc in/Dc out, Dc in/Ac out and Ac in/Dc out versions available
• Versions with switching speeds up to 100kHz available
• 2.5kVac input to output isolation
• LED status indication
• Module width 6.2mm
• Operating temperature range: -20 to +60°C

Standards

IEC 60 664, IEC 60 664A, DIN VDE 0110

DEK-OE-5DC/24DC/100KHZ

An Input solid-state relay for DIN rail mounting, with yellow LED display and includes signal inputs on PLC counter boards.

Features and Benefits

• Reverse polarity and surge protection
• Screw connection
• Capacitor on the input side for interference suppression
• M3 thread

Specificaties
Kenmerk Waarde
Maximum Forward Voltage 5 V
Maximum Input Current 7 mA
Isolation Voltage 2.5kV
Mounting Style DIN Rail
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
Length 80mm
Width 6.2mm
Depth 56mm
Series DEK-OE-5DC/24DC/100KHZ
Operating Temperature Range -20 → +60 °C
Dimensions 56 x 6.2 x 80 mm
76 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
102 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
39,13
(excl. BTW)
47,35
(incl. BTW)
Aantal stuks
Per stuk
1 +
39,13 €
Related Products
Kudom KSV Series industrial solid state relays with ...
Description:
Kudom KSV Series industrial solid state relays with an integrated heatsink, designed for mounting on 35 mm DIN Rail or screwed onto a panel. The KSV SSR's offer four control voltage variations, in both AC or DC. Zero crossing switching ...
The VOMA617A series has a GaAlAs infrared emitting ...
Description:
The VOMA617A series has a GaAlAs infrared emitting diode, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a 4-pin mini-flat package. It features a high current transfer ratio at low input current, low coupling ...
PLC Interface single- and double-pole relays, and opto-couplers, ...
Description:
PLC Interface single- and double-pole relays, and opto-couplers, having the same profile. This allows the modules to be installed in any configuration with a common bridging system and using the same accessories. The V8 adapter connects 8 relays or opto-couplers ...
The SIRIUS 3TX7 narrow design interface relays are ...
Description:
The SIRIUS 3TX7 narrow design interface relays are coupling elements used to connect control signals to and from a PLC. Coupling device (interface) as a connector moduleControl and peripheral motor protectionEquipment: DIN VDE 0110, DIN VDE 0435, DIN VDE 0660 ...