Phoenix Contact Optocoupler, Max. Forward 24 V, Max. Input 7 mA, 102mm Length, DIN Rail Mounting Style

Datasheets
Wetgeving en conformiteit
Niet conform
Land van herkomst: DE
Productomschrijving

Solid State Module, Series EMG-OV

EMG-OV power opto couplers are used as the modular interface in all industrial fields for signal amplification to 230V / 3A and for electrical isolation.
Input and output end suppressors, integrated operating display and a 3.5 kV test voltage ensure maximum safety and reliability.

//media.rs-online.com/t_line/LD308140-02.gif
//media.rs-online.com/t_line/LD308140-03.gif
Specificaties
Kenmerk Waarde
Maximum Forward Voltage 24 V
Maximum Input Current 7 mA
Isolation Voltage 3.5kV
Mounting Style DIN Rail
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
Length 102mm
Width 17.5mm
Depth 75mm
Operating Temperature Range -20 → +60 °C
Series EMG 17-OV- 24DC/ 60DC/3
38 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
68,60
(excl. BTW)
83,01
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
68,60 €
5 - 9
66,45 €
10 +
65,81 €
Related Products
Managed Industrial Ethernet SwitchFor setting up Ethernet networks ...
Description:
Managed Industrial Ethernet SwitchFor setting up Ethernet networks with 10/100Mbit/sLine, star and ring structure with switching functionalityRange up to 26,000 mSubscriber or network connections electrical or optical depending on the device port characteristicsRedundant voltage feedDiagnosis at the device itself ...
Package consists of relay, DIN rail socket, module, ...
Description:
Package consists of relay, DIN rail socket, module, retainer and marking tabMechanical and electrical indicatorManual test tabDC versions complete with LED & protection diode moduleAC versions complete with LED & varistor moduleDIN socket has logical arrangement of control/load terminals, with ...
The SIRIUS 3TX7 narrow design interface relays are ...
Description:
The SIRIUS 3TX7 narrow design interface relays are coupling elements used to connect control signals to and from a PLC. Coupling device (interface) as a connector moduleControl and peripheral motor protectionEquipment: DIN VDE 0110, DIN VDE 0435, DIN VDE 0660 ...
In order to fit voltage/current together with galvanic ...
Description:
In order to fit voltage/current together with galvanic insulation, interface is necessary through devices providing these functions plus transmission of input/output logic signals.,The R600 range of relays and optocouplers makes it possible. These devices provide many voltage and current adjustments ...