Phoenix Contact Optocoupler, Max. Forward 220 V, Max. Input 3.5 MA

Datasheets
Wetgeving en conformiteit
Niet conform
Land van herkomst: DE
Productomschrijving

Phoenix Contact PLC-RSC Series

PLC Interface single- and double-pole relays, and opto-couplers, having the same profile. This allows the modules to be installed in any configuration with a common bridging system and using the same accessories. The V8 adapter connects 8 relays or opto-couplers to a 15 way D-SUB cable.

Features and Benefits

• Relays and opto-couplers for inputs and outputs with "pluggable" switching devices
• Four bridging slots to reduce wiring; bridging of up to 80 modules is possible
• Screw terminal connections
• LED indicators and diodes for coil suppression
• 250V versions have a switched power rating of 1500VA
• Mechanical life (relays) 1 x 107 operations
• Wide range of accessories also available

Specificaties
Kenmerk Waarde
Maximum Forward Voltage 220 V
Maximum Input Current 3.5 mA
Isolation Voltage 2.5kV
Minimum Operating Temperature -25°C
Maximum Operating Temperature +60°C
CAD Drawing 3D CAD Model
27 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
26,00
(excl. BTW)
31,46
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
26,00 €
5 - 9
25,21 €
10 +
24,92 €
Related Products
The VOMA617A series has a GaAlAs infrared emitting ...
Description:
The VOMA617A series has a GaAlAs infrared emitting diode, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a 4-pin mini-flat package. It features a high current transfer ratio at low input current, low coupling ...
The SIRIUS 3TX7 narrow design interface relays are ...
Description:
The SIRIUS 3TX7 narrow design interface relays are coupling elements used to connect control signals to and from a PLC. Coupling device (interface) as a connector moduleControl and peripheral motor protectionEquipment: DIN VDE 0110, DIN VDE 0435, DIN VDE 0660 ...
In order to fit voltage/current together with galvanic ...
Description:
In order to fit voltage/current together with galvanic insulation, interface is necessary through devices providing these functions plus transmission of input/output logic signals.,The R600 range of relays and optocouplers makes it possible. These devices provide many voltage and current adjustments ...
Interface relays and optocouplers are useful to link ...
Description:
Interface relays and optocouplers are useful to link sensors and actuators in the process, which are connected to the PLC via conventional wires.The interface modules providing both voltage-current level adaptation and isolation. Build in RC-circuits to increase the contact-lifeScrew or ...