Broadcom, ACPL-M72T-000E DC Input CMOS Detector IC Output Optocoupler, Surface Mount, 5-Pin SO

  • RS-stocknr. 768-7862
  • Fabrikantnummer ACPL-M72T-000E
  • Fabrikant Broadcom
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Automotive Digital Optocouplers, Avago Technologies

Digital optocouplers for automotive applications are designed to meet the digital CANBus interface. Isolation applications range from power supply and motor control circuits to digital data communication. They offer high-speed logic gate switching that operate at Mega Baud rates.
Avago Technologies R2Coupler™ isolation Optocouplers provide the reinforced insulation and reliability needed for critical automotive and high temperature applications.

AEC-Q100 grade qualified

Optocouplers, Avago Technologies

Specificaties
Kenmerk Waarde
Mounting Type Surface Mount
Output Device CMOS Detector IC
Maximum Forward Voltage 1.85V
Number of Channels 1
Number of Pins 5
Package Type SO
Input Current Type DC
Typical Rise Time 10ns
Maximum Input Current 15 mA
Isolation Voltage 4000 Vrms
Logic Output Yes
Typical Fall Time 10ns
28 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
55 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
3,74
(excl. BTW)
4,53
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
3,74 €
10 - 49
2,81 €
50 - 99
2,56 €
100 - 249
2,31 €
250 +
2,09 €
Verpakkingsopties
Related Products
Dual 4-channel analog multiplexer/demultiplexer, The 74HC4052-Q100, 74HCT4052-Q100 is ...
Description:
Dual 4-channel analog multiplexer/demultiplexer, The 74HC4052-Q100, 74HCT4052-Q100 is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL). The device is specified in compliance with JEDEC standard no. 7A. The 74HC4052-Q100, 74HCT4052-Q100 is a dual 4-channel ...
This range of optocouplers with darlington output, from ...
Description:
This range of optocouplers with darlington output, from Avago Technologies, offer a high current transfer ratio with low input current requirements. The optocoupler devices use light emitting diodes (LEDs) optically coupled with integrated high gain photodetectors. They provide excellent input-output ...
The 6N139 is an optically coupled isolator. It ...
Description:
The 6N139 is an optically coupled isolator. It consists of an infrared emitting diode and an integrated high gain photon detector to provide 3000Vdc electrical insulation, 500V/μS common mode transient immunity and extremely high current transfer ratio between input and ...
Avago Technologies optocouplers for IPM (Intelligent Power Module) ...
Description:
Avago Technologies optocouplers for IPM (Intelligent Power Module) interface exhibit short propagation delay, fast IGBT switching, high common mode transient rejection and wide operating temperature range.Avago Technologies R2Coupler™ isolation products provide the reinforced insulation and reliability needed for ...