Renesas, PS2801C-1-V-A DC Input Phototransistor Output Optocoupler, Surface Mount, 4-Pin SSOP
- RS-stocknr.:
- 186-4327
- Fabrikantnummer:
- PS2801C-1-V-A
- Fabrikant:
- Renesas Electronics
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 186-4327
- Fabrikantnummer:
- PS2801C-1-V-A
- Fabrikant:
- Renesas Electronics
Datasheets
Wetgeving en conformiteit
Productomschrijving
DC input/single transistor output photocouplers (optocouplers) are optically coupled isolators containing a GaAs infrared light emitting diode and an NPN silicon phototransistor. This type is suitable for applications such as I/O interfaces and signal transmission circuits.
These products are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon phototransistor in a plastic SSOP for high density applications to realize an excellent cost performance. This package has shield effect to cut off ambient light.
High isolation voltage (BV = 2 500 Vr.m.s.)
Small and thin package (4, 16-pin SSOP, Pin pitch 1.27 mm)
High collector to emitter voltage (VCEO : 80 V)
Pb-Free product
APPLICATIONS
Programmable logic controllers
Measuring instruments
Power supply
Hybrid IC
Small and thin package (4, 16-pin SSOP, Pin pitch 1.27 mm)
High collector to emitter voltage (VCEO : 80 V)
Pb-Free product
APPLICATIONS
Programmable logic controllers
Measuring instruments
Power supply
Hybrid IC
Specificaties
Kenmerk | Waarde |
|---|---|
| Mounting Type | Surface Mount |
| Output Device | Phototransistor |
| Maximum Forward Voltage | 1.4V |
| Number of Channels | 1 |
| Number of Pins | 4 |
| Package Type | SSOP |
| Input Current Type | DC |
| Typical Rise Time | 5µs |
| Maximum Input Current | 5 mA |
| Isolation Voltage | 2.5 kVrms |
| Maximum Current Transfer Ratio | 400% |
| Typical Fall Time | 7µs |
| Minimum Current Transfer Ratio | 50% |
- RS-stocknr.:
- 186-4327
- Fabrikantnummer:
- PS2801C-1-V-A
- Fabrikant:
- Renesas Electronics