- RS-stocknr.:
- 172-4602
- Fabrikantnummer:
- NCS20071SN2T1G
- Fabrikant:
- onsemi
- RS-stocknr.:
- 172-4602
- Fabrikantnummer:
- NCS20071SN2T1G
- Fabrikant:
- onsemi
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- MY
Productomschrijving
The NCx2007x series operational amplifiers provide rail−to−rail output operation, 3 MHz bandwidth, and are available in single, dual, and quad configurations. Rail−to−rail operation enables the user to make optimal use of the entire supply voltage range while taking advantage of 3 MHz bandwidth. The NCx2007x can operate on supply voltages as low as 2.7 V over the temperature range of −40°C to 125°C. At a 2.7 V supply, the high bandwidth provides a slew rate of 2.8 V/μs while only consuming 405 μA of quiescent current per channel.
Wide Supply Range: 2.7 V to 36 V
Wide supply range suitable for a variety of applications
Wide Bandwidth: 3 MHz typical at Vs = 2.7 V
Compatible with high sped signals up to 3 MHz
Low Supply Current: 405 μA per channel at VS = 2.7 V
Low current consumption
High Slew Rate: 2.8 V/μs typical at VS = 2.7 V
High large signal bandwidth
Low Input Bias Current: 5 pA typical
High input impedance
Wide supply range suitable for a variety of applications
Wide Bandwidth: 3 MHz typical at Vs = 2.7 V
Compatible with high sped signals up to 3 MHz
Low Supply Current: 405 μA per channel at VS = 2.7 V
Low current consumption
High Slew Rate: 2.8 V/μs typical at VS = 2.7 V
High large signal bandwidth
Low Input Bias Current: 5 pA typical
High input impedance
Specificaties
Kenmerk | Waarde |
---|---|
Amplifier Type | Operational Amplifier |
Mounting Type | Surface Mount |
Package Type | TSOP |
Power Supply Type | Single |
Number of Channels per Chip | 1 |
Pin Count | 5 |
Typical Single Supply Voltage | 2.7 → 36 V |
Typical Gain Bandwidth Product | 3MHz |
Output Type | Rail to Rail |
Typical Slew Rate | 2.8V/µs |
Maximum Operating Frequency | 10 kHz |
Maximum Operating Temperature | +125 °C |
Minimum Operating Temperature | -40 °C |
Automotive Standard | AEC-Q100 |
Rail to Rail | Rail to Rail Output |
Typical Voltage Gain | 118 dB |
Offset Voltage | ±4.5mV |
Output Current | ±100 mA |
Maximum Input Voltage | 36 V |
Input Offset Current | 500pA |
Dimensions | 3.15 x 1.65 x 1mm |
Height | 1mm |
Input Voltage Range | 2.7 → 36 V |
Length | 3.15mm |
Minimum Input Voltage | 2.7 V |
Width | 1.65mm |
Typical Input Voltage Noise Density | 30nV/√Hz |