Carel PJ Easy On/Off Temperature Controller, 81 x 36mm, NTC Input, 230 V ac Supply

  • RS-stocknr. 809-0997
  • Fabrikantnummer PJEZS0G000
  • Fabrikant Carel
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

CAREL ON/OFF Temperature Controller

The CAREL PJ Easy series temperature controller has a supply voltage rating of 230VAC. This controller has a width of 36mm and a height of 81mm. It has one relay output for use in static refrigeration units (i.e. with no evaporator fan) and a single NTC sensor input. It is specifically used in chilled showcases, refrigerated units and display cases.
PJEZS (Stock No. 809-0997)
Used with static refrigeration units in mind and a single NTC sensor input
PJEZC (Stock No. 809-0994 & 913-9983)
Ventilated unit dedicated controller, suitable for use in a variety of ventilation environments including compressors & defrost control. It supports 2 NTC probe inputs accompanied by a digital or 3rd NTC input
PJEZY (Stock No. 809-0985 & 913-9986)
Specifically for use on static units with active defrost via heater, control & defrost NTC input

Features and Benefits

Fast set up using pre-set configuration or programme key
Integrated real time clock and buzzer
Power drain is 1.5VA
Pre-set configurations and programme key ensures swift set up
Sensor options are NTC 10K at 25ºC
Serial connection for comprehensive compatibility

Certifications

IP65 rated (front panel mounting)

Specificaties
Kenmerk Waarde
Input Type NTC
Supply Voltage 230 V ac
Size 81 x 36mm
Minimum Operating Temperature -10°C
Maximum Operating Temperature +50°C
Panel Depth 58mm
Series PJ Easy
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
26 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
113,71
(excl. BTW)
137,59
(incl. BTW)
Aantal stuks
Per stuk
1 +
113,71 €
Related Products
From our RS PRO range, this high quality ...
Description:
From our RS PRO range, this high quality digital controller offers a J thermocouple input. Featuring built in On/Off or pulse output status, it can be used for heating or cooling control. This controller is easy to configure and install, ...
Ideal for use with NTC sensors from our ...
Description:
Ideal for use with NTC sensors from our RS PRO range, this high quality digital controller offers a J thermocouple input. Featuring built in On/Off or pulse output status, it can be used for heating or cooling control. Easy to ...
PT100 and PT1000 probe temperature indicator, J, K ...
Description:
PT100 and PT1000 probe temperature indicator, J, K and L thermocouples and 4 // 20 mA, 0 // 20 mA analogue output.3-digit indicator with red backlighting.1 C/O relay output in case of setpoint being exceeded.Supply voltage: 230 Vac.
“Easy freeze” is an electronic microprocessor controllers with ...
Description:
“Easy freeze” is an electronic microprocessor controllers with LED display developed for the management of refrigerating units, display cabinets and showcases. For low temperature ventilated refrigeration unitsPre-configured to reduce the start-up timesLimited number of parameter, only 27Power supply ...