15 °, 1 A, 120V, Tilt Switch

  • RS-stocknr. 618-7507
  • Fabrikantnummer S1016CW
  • Fabrikant Assemtech
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Tilt Switch with Mounting Clip

Mercury and Mercury-free tilt switches
Insulated IP65 ABS housings
Prewired with 150mm of 2 core silicone cable terminated with ring terminals
Mounting clip hole Ø 4.7mm
Suitable for switching inductive and capacitive loads, motors, incandescent lamps, etc.

Mercury Tilt, Vibration & Movement

Glass and metal bodied versions offer bounce-free switching and quick break action even when tilted slowly. Contacts make and break with vibration motion and return to the open state at rest. Unless otherwise stated, the angle by which the switch must be tilted to ensure contact operation (operating angle), must be approximately 1.5 to 2 times the stated differential angle. The differential angle is the measure from the “just closed” position to the “just open” position. Inert gas and hermetic sealing protects contacts

Warning

  • Mercury is a toxic substance. Do not cut open or incinerate these devices. Dispose of safely in accordance with prescribed practice and local regulations.
Specificaties
Kenmerk Waarde
Differential Angle 15 °
Maximum Current 1 A
Maximum AC Voltage 120V
Contact Resistance
Terminal Type Wire Lead
Length 196.5mm
Minimum Operating Temperature -20°C
Maximum Operating Temperature +70°C
Dimensions 196.5 x 13 mm
622 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
497 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
9,68
(excl. BTW)
11,71
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
9,68 €
5 - 9
9,39 €
10 +
9,01 €
Related Products
Steute Ex 97 limit switches are used where ...
Description:
Steute Ex 97 limit switches are used where moving parts of machines and industrial plants have to be positioned, controlled and monitored. The Ex safety position switches are suitable for sliding and hinged safety guards, which need to be closed ...
Gas filled, hermetically sealed in miniature metal housings ...
Description:
Gas filled, hermetically sealed in miniature metal housings for use in ON/OFF control applications±7.5° from the horizontal angleThe switch movement required to cause contact change (E.g. on/off) is called the differential angle.
Sensor reacts when disturbed by giving a fleeting ...
Description:
Sensor reacts when disturbed by giving a fleeting change of state (i.e. N/O to N/C or vice versa). The time taken to settle depends on the amount of energy absorbed by the device, the settled state will be random unless ...
Adjustable sensitivity via an internal potentiometerIP65 ABS housing ...
Description:
Adjustable sensitivity via an internal potentiometerIP65 ABS housing which is prewired with 300mm (Vibration/Movement version) or 100mm (Tilt version) of 3 core PVC cableNon-position sensitive with a 24mA output at 5VdcTilt switch features anti vibration circuitry.