Wago DPDT Relay Interface Module DIN Rail, 24 V dc Coil, 1 A, 8 A Miniature Relay

  • RS-stocknr. 180-3039
  • Fabrikantnummer 788-390
  • Fabrikant Wago
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Relay module, Nominal input voltage: 24 VDC, 2 changeover contacts, Limiting continuous current: 8 A, Path, Red status indicator, Module width: 15 mm

Reinforced insulation between coil and contacts
A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements.
To protect the relay coils and contacts, inductive loads must be dampened with an effective protection circuit.

Specificaties
Kenmerk Waarde
Coil Voltage 24 V dc
Coil Power 2000 W
Contact Configuration DPDT
Mounting Type DIN Rail
Switching Current 8A
Terminal Type Cage Clamp
Maximum Switching Current AC 1.5 A
Maximum Switching Current DC 1 A
Maximum Switching Voltage AC 250 V
Maximum Switching Voltage DC 24 V
Maximum Switching Power AC 2 kVA
Series 788
Depth 86 mm
Height 73 mm
Length 15 mm
9 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
Was 22,40 €
17,27
(excl. BTW)
20,90
(incl. BTW)
Aantal stuks
Per stuk
1 +
17,27 €
Related Products
High coil sensitivity: 150mWHigh switching capacity: 125VA/60WContact rating: ...
Description:
High coil sensitivity: 150mWHigh switching capacity: 125VA/60WContact rating: 1A @ 125Vac, 2A @ 30VdcBifurcated contactsEpoxy sealed for automatic-wave soldering and cleaningWash tight.
Ultra compact (5.7x10.6x10 mm) DPDT surface mounting signal ...
Description:
Ultra compact (5.7x10.6x10 mm) DPDT surface mounting signal relayFully sealedConforms to North American Telcordia specifications (formerly Bellcore)Conforms to FCC Part 68 (i.e. impulse withstand voltage of 1500V for 10x160μs between coil and contacts and between contacts of the same polarity). ...
Finder 50 series safety relay with forcibly guided ...
Description:
Finder 50 series safety relay with forcibly guided contacts according to EN 50205 type B. High physical separation between adjacent contacts8mm, 6kV (1.2/50μs) isolation, coil to contactFlux proof: RT II.
25 A modular contactors, available in 2/4 pole. ...
Description:
25 A modular contactors, available in 2/4 pole. Continuous duty for the coil and contactorsAC/DC silent coil (with varistor protection)Mechanical and LED indicators as standardProtective separation (reinforced insulation) between coil and contacts35 mm rail (EN 60715) mountCompliant with EN 6109 ...