RS PRO Non-Fused Terminal Block, 2 Way/Pole, Screw Down Terminals, 2.5 mm² Cable Mount, Nylon, 400 V Male

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

Disconnectable Terminal Block Connector, Plastic

Disconnectable terminal block connector, available in 2 and 3 pole in a choice of either brown or white. Rated at 400V, 16A
They are held securely together with the arm lock mechanism and the polarised housing prevents mismatching of the plugs

Note

Both a Socket and Plug terminal block of the same number of ways are required to construct a mated pair.

Approvals

IMQ, DEMKO, SEMKO, NEMKO, FIMKO

Plastic Two Part

Terminal blocks with a plug/socket arrangement which allow the block to be separated into two halves, isolating the plug strip without the need to remove each connection individually.

Specificaties
Kenmerk Waarde
Number of Ways 2
Mounting Type Cable Mount
Current Rating 16A
Termination Method Screw Down
Wire Size 2.5 mm²
Gender Male
Material Nylon
Voltage Rating 400 V
Colour Brown
Maximum Operating Temperature +150°C
Contact Material Brass
Contact Plating Tin
95 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
160 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
1,034
(excl. BTW)
1,251
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 245
1,034 €
5,17 €
250 - 495
0,982 €
4,91 €
500 +
0,93 €
4,65 €
*prijsindicatie
Related Products
Accepts 5x20mm& 6.3x25mm (1”x1/4”) fuses Conforms to IEC257 ...
Description:
Accepts 5x20mm& 6.3x25mm (1”x1/4”) fuses Conforms to IEC257 Anti rotation spigot IP20 finger protection Cable entry 10mm sq (3x1.5mm sq or 2x2.5mm sq)Supplied complete with earth screw and washer.
Moduface housings with a 20 mm, 22.5mm or ...
Description:
Moduface housings with a 20 mm, 22.5mm or 40 mm pitch are intended for mounting industrial electronic equipment such as interface circuits, including complete control devices.These housings with screw-connection terminals offer quick snap-fit installation on common EN profiles.
TWIN-BLOCK terminals can be used to junction flexible ...
Description:
TWIN-BLOCK terminals can be used to junction flexible copper wires between 10 and 120mm², perfect for use in conduit or cable tray. They offer a high grade of mechanical and dielectric strength, IP20 protection and are easy to install.,Their original ...
COMBICON PT series compact terminals with 5 mm ...
Description:
COMBICON PT series compact terminals with 5 mm grid for use with PST pin header. • Screw connection• Highly flexible cable protection• Connection options — horizontal and vertical to printed circuit board.