- RS-stocknr.:
- 773-8049
- Fabrikant:
- RS PRO
- RS-stocknr.:
- 773-8049
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- IN
Productomschrijving
RS PRO 4 Pole Panel Mount Non Fused Isolator Switch - 100 A Maximum Current, 55 kW Power Rating, IP54
When you need to work on an electrical circuit safely, you can use an isolation switch to separate it from the main source of power. This non-fused isolator switch from RS PRO will power down or isolate part of a circuit whenever you need to carry out maintenance on it.
As this is a non-fused device, you disconnect using a knife-blade or rotary function so it can be reset without replacing a fuse. It will operate at temperatures from -25°C to +80°C and can be used in a wide range of applications.
The switch conforms to ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 standards and won't damage your equipment through electrostatic discharge. It is dust resistant and can withstand water spray. You'll find these switches used in low voltage switchgear such as power distribution, load isolation and motor start/stop.
As this is a non-fused device, you disconnect using a knife-blade or rotary function so it can be reset without replacing a fuse. It will operate at temperatures from -25°C to +80°C and can be used in a wide range of applications.
The switch conforms to ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 standards and won't damage your equipment through electrostatic discharge. It is dust resistant and can withstand water spray. You'll find these switches used in low voltage switchgear such as power distribution, load isolation and motor start/stop.
Features and Benefits
Panel mounting
Maximum current of 100 A
Power rating of 55 kW
Voltage rating of 690 V AC
Switch rating of 30 kA
Operating temperature range of -25°C to +80°C
Some dust resistance and spray-resistant (IP54 Rating)
Red handle colour
Accepts padlocks
Length of 270 mm
Depth of 125 mm
Auxiliary contacts available
Three phases
Four poles
Maximum current of 100 A
Power rating of 55 kW
Voltage rating of 690 V AC
Switch rating of 30 kA
Operating temperature range of -25°C to +80°C
Some dust resistance and spray-resistant (IP54 Rating)
Red handle colour
Accepts padlocks
Length of 270 mm
Depth of 125 mm
Auxiliary contacts available
Three phases
Four poles
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Specificaties
Kenmerk | Waarde |
---|---|
Number of Poles | 4P |
Maximum Current | 100A |
Mounting Type | Panel Mount |
IP Rating | IP54 |
Power Rating | 55kW |
Voltage Rating | 690V ac |
Electrical Phase | 3 |
Accepts Padlocks | Yes |
Handle Colour | Red |
Auxiliary Contacts Available | Yes |
Switch Rating | 30kA |
Length | 270mm |
Width | 215mm |
Depth | 125mm |
Minimum Operating Temperature | -25°C |
Maximum Operating Temperature | +80°C |