- RS-stocknr.:
- 393-9692
- Fabrikantnummer:
- 78634628 T3-1-8200/I2H/SVB/K-CI-K1/2
- Fabrikant:
- Eaton
3 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Per stuk
€ 77,59
(excl. BTW)
€ 93,88
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 77,59 |
5 - 11 | € 75,18 |
12 + | € 72,78 |
- RS-stocknr.:
- 393-9692
- Fabrikantnummer:
- 78634628 T3-1-8200/I2H/SVB/K-CI-K1/2
- Fabrikant:
- Eaton
Datasheets
Wetgeving en conformiteit
N.v.t.
- Land van herkomst:
- GB
Productomschrijving
Eaton Enclosed Isolator Switch
Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.
Features & Benefits
The perfect solution for installing as a safety measure
Used as an emergency switching off/emergency stop device
The basic functions: used as a main switch, maintenance switch or manual override switch
Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
Built-in earth commoning block
Lockable in the 0/OFF position, with up to three padlocks
Totally insulated
Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish
Used as an emergency switching off/emergency stop device
The basic functions: used as a main switch, maintenance switch or manual override switch
Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
Built-in earth commoning block
Lockable in the 0/OFF position, with up to three padlocks
Totally insulated
Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish
What is the difference between a fused switch disconnector and a non-fused switch disconnector?
Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.
Note
Switch power/capacity refers to AC23A use at 380-440V
Note
Eaton formerly known as Moeller
Specificaties
Kenmerk | Waarde |
---|---|
Number of Poles | 1P |
Maximum Current | 32A |
IP Rating | IP65 |
Power Rating | 13kW |
Voltage Rating | 400V ac |
Electrical Phase | 1 |
Accepts Padlocks | Yes |
Handle Colour | Red |
Series | Eaton Moeller |
Length | 180mm |
Width | 100mm |
Depth | 80mm |
Maximum Operating Temperature | +40°C |
Terminal Type | Screw |
Minimum Operating Temperature | -25°C |
- RS-stocknr.:
- 393-9692
- Fabrikantnummer:
- 78634628 T3-1-8200/I2H/SVB/K-CI-K1/2
- Fabrikant:
- Eaton