3 + N Pole Panel Mount Switch Disconnector, 3NO, 25 A, 13 kW, IP65

  • RS-stocknr. 103-8440
  • Fabrikantnummer P1-25/EA/SVB/N
  • Fabrikant Eaton
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Eaton Non-Fused Switch Disconnectors - P1 Series Isolators

The P1 series of switch-disconnectors are compact and robust, they are ideal for hard-wearing industrial environments with a rated uninterrupted current of up to 32 Amps. This range of isolator switches from Eaton is suitable for use in applications where there is a need to disconnect electrical equipment from the circuit. The need for this form of local isolation is most commonly needed for repair and maintenance of the electrical equipment on the de-energised circuit. These disconnect switches can also be used as safety switches.

• Preforms local isolation, manual override & safety switch functions

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

Specificaties
Kenmerk Waarde
Number of Poles 3 + N
Maximum Current 25 A
Series P1-25
Mounting Type Panel Mount
Normal State Configuration 3NO
Power Rating 13 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 690 V
Electrical Phase 1, 3
Switch Rating 190 A
Length 48mm
Width 99mm
Depth 65mm
Handle Colour Red
Maximum Operating Temperature +50°C
Minimum Operating Temperature -25°C
Throw Configuration Single
Terminal Type Screw
21 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
33 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
51,69
(excl. BTW)
62,54
(incl. BTW)
Aantal stuks
Per stuk
1 +
51,69 €
Related Products
RS Pro high quality range of panel mount ...
Description:
RS Pro high quality range of panel mount switch disconnectors for use with low voltage switchgear such as power distribution, load isolation and motor start/stop. All switch ratings at AC22RoHS compliantMaximum panel thickness 3mmDepth behind panel 102min/117max mmDimensions 72(H)x50(W) mmActuator ...
Professional range of Eaton flush or surface mounted ...
Description:
Professional range of Eaton flush or surface mounted changeover switches. All the changeover switches are IP65 rated and have red rotary handle. All the switches are lockable in the OFF position. IP65 RatedFlush or Surface MounitingRed rotary handleLockable in the ...
Professional range of Eaton flush or surface mounted ...
Description:
Professional range of Eaton flush or surface mounted changeover switches. All the changeover switches are IP65 rated and have red rotary handle. All the switches are lockable in the OFF position. IP65 RatedFlush or Surface MounitingRed rotary handleLockable in the ...
All have a nominal voltage of 690V. The ...
Description:
All have a nominal voltage of 690V. The stated motor rating utilisation category AC23A/AC3 is for 3 phase 380/440V supply. Padlockable (x4) in "OFF" positionFingerproof main terminals on 20A to 63A switchesTerminal shrouds supplied with 80A to 250A switches.