Wieland, WST Series Shielded Cable Terminal, Spring Clamp Termination

  • RS-stocknr. 832-8955
  • Fabrikantnummer Z2.803.3010.0
  • Fabrikant Wieland
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Shield Connection Terminals

Shield connection terminal blocks for mounting on busbars.

832-8955 - for cable diameter 3 - 8mm
832-8959 - for cable diameter 4 - 13.5mm
832-8968 - for cable diameter 10 - 20mm
832-8961 - for cable diameter 15 - 32mm
832-8965 - for cable diameter 3 - 8mm
832-8974 - for cable diameter 4 - 13.5mm
832-8977 - for cable diameter 10 - 20mm
832-8971 - for cable diameter 15 - 32mm
832-8980 - for cable diameter 3 - 8mm
832-8983 - for cable diameter 4 - 13.5mm
832-8987 - for cable diameter 10 - 20mm
832-8996 - for cable diameter 15 - 32 mm
832-8999 - for cable diameter 3 - 8 mm
832-8993 - for cable diameter 4 - 13.5mm
832-9006 - for cable diameter 10 - 20mm

Grounding/Earthing and Shielding

Specificaties
Kenmerk Waarde
Series WST
Number of Levels Single
Termination Method Spring Clamp
Pitch 13mm
8 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 2)
3,955
(excl. BTW)
4,786
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
2 +
3,955 €
7,91 €
*prijsindicatie
Related Products
Sectional terminal blocks with disconnect tab. • DIN ...
Description:
Sectional terminal blocks with disconnect tab. • DIN Rail mounting on TS 35 DIN Rail• 3 conductors (1 input, 2 outputs)• Quick connection using cage-type springs, not affected by impact and vibration• For rigid, semi-rigid and flexible conductors• Front wiring. ...
Screw compression clamp terminals incorporating a spring under ...
Description:
Screw compression clamp terminals incorporating a spring under each wire clamp, giving high vibration resistance and also meets requirements of ESI 50//18. Each termination will accept two hook bladed crimp terminals, one locating on the current bar behind the screw ...
This universal range of terminals mounts on both ...
Description:
This universal range of terminals mounts on both asymmetric rail 'G' profile and Top hat profile. Moulded in tough flame-resistant polyamide 6.6, with a working temperature of -55°C to +130°C. The captive terminal screws have hardened heads to prevent burring. ...
These screwless spring cage clamp terminals are specifically ...
Description:
These screwless spring cage clamp terminals are specifically designed for use with 'Top Hat' rail.,The top entry conductor connection is simplicity itself; a flat-bladed screwdriver will ease the spring clamp apart ready for conductor insertion.The range covers conductor sizes from ...