Phoenix Contact, UK 10 Series , 800 V Feed Through Terminal Block, Screw Termination

Datasheets
Wetgeving en conformiteit
N.v.t.
Productomschrijving

Universal Terminals

Universal terminals moulded in polyamide to fit both 'G' and 'Top Hat' rail.
Screw conductor securing with closed screwdriver shafts. Available conductor acceptance sizes, 2.5mm² to 35mm². The range comprises of grey (phase), blue (neutral), and yellow/green (earth) terminals. A 10-way insertion (jumper) bridge is also available, as is a 35mm rail end bracket.

Individual terminals and complementary accessories

Approval Category II 2 GD EEx e II Cert. No. KEMA 98ATEX1651U

Specificaties
Kenmerk Waarde
Series UK 10
Wire Size 20 → 8 AWG
Colour Grey
Current Rating 57A
Number of Levels Single
Termination Method Screw
Voltage Rating 800 V
52 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
4,63
(excl. BTW)
5,60
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
4,63 €
25 - 99
4,50 €
100 - 249
4,38 €
250 - 499
4,26 €
500 +
4,15 €
Related Products
For the termination of 3 wire sensors. Common ...
Description:
For the termination of 3 wire sensors. Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both ...
Feed-through Screw terminal blocks for cables with cross ...
Description:
Feed-through Screw terminal blocks for cables with cross section 2.5 to 35 mm². The terminals are equipped with integral anti-slackening protection and guarantee reliable connection in all low voltage installations. • Low profile range of terminals that enables transition from ...
Disconnect terminal blocks enable you to rapidly localise ...
Description:
Disconnect terminal blocks enable you to rapidly localise system faults, and permits inspection work to be carried out under zero voltage conditions. A standard height version for 2.5mm² wire, and a double-deck version for 4.0mm² wire is availableColour grey.
UTI series terminal blocks have a low vertical ...
Description:
UTI series terminal blocks have a low vertical height profile making them ideal for space restricted applications. They also feature a quick install bus bar option that reduces installation time. Low profile, only 58mm high on standard TS35 DIN railSupports ...