Phoenix Contact, UT Series , 500 V Standard Din Rail Terminal, Screw Down Termination

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

UT-COMBI screw connection terminal blocks

Terminal block with pull-out connection zone from the CLIPLINE COMBI range.
Screw connection.
Permissible cable cross-section: 2.5 mm².
Compatible with SP, UP, QP and DP ready-made connectors.
Terminal block width: 5.2 mm.
TS35 DIN rail mounting.

CLIPLINE COMBI terminal blocks

A highly flexible system of terminal blocks featuring a disconnectable plug-in zone and 4 connection methods: screw (UT), spring-cage (ST), push-in (DT) and self-stripping (QT). The entire range is standardised. These four connections methods can be freely combined to connect terminal blocks and pluggable connectors, whatever their connector type. Both the bases and connectors are protected from coming into contact with hands. Self-stripping connections (QT-COMBI): Wiring time is reduced by up to 60%, as cables need not be stripped.A screwdriver is used to lock the self-stripping mechanism. Spring terminals (ST - COMBI): The connection point is opened using a screwdriver to lever the spring. This technology provides constant contact force for vibration-proof use. Screw connection (UT - COMBI): Universal terminal enabling a multi-conductor connection.

Specificaties
Kenmerk Waarde
Series UT 2.5/1P-PE
Wire Size 26 → 12 AWG
Colour Grey
Current Rating 24A
Number of Levels Single
Termination Method Screw Down
Voltage Rating 500 V
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
140 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
Was 0,77 €
0,664
(excl. BTW)
0,803
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 45
0,664 €
3,32 €
50 - 120
0,632 €
3,16 €
125 +
0,602 €
3,01 €
*prijsindicatie
Related Products
This universal range of terminals mounts on both ...
Description:
This universal range of terminals mounts on both asymmetric rail 'G' profile and Top hat profile. Moulded in tough flame-resistant polyamide 6.6, with a working temperature of -55°C to +130°C. The captive terminal screws have hardened heads to prevent burring. ...
Grey for standard circuit, blue for neutral conductor, ...
Description:
Grey for standard circuit, blue for neutral conductor, orange for circuit not broken by the master isolating device, red for special circuits (safety, protected, etc), green for protection conductor class II equivalent assemblies. Used to make the electrical connection between ...
Universal terminals moulded in polyamide to fit both ...
Description:
Universal terminals moulded in polyamide to fit both 'G' and 'Top Hat' rail.Screw conductor securing with closed screwdriver shafts. Available conductor acceptance sizes, 2.5mm² to 35mm². The range comprises of grey (phase), blue (neutral), and yellow/green (earth) terminals. A 10-way ...
Disconnect terminal blocks enable you to rapidly localise ...
Description:
Disconnect terminal blocks enable you to rapidly localise system faults, and permits inspection work to be carried out under zero voltage conditions. A standard height version for 2.5mm² wire, and a double-deck version for 4.0mm² wire is availableColour grey.