Harting, Staf Series , 50 V Standard Din Rail Terminal, Solder Termination

  • RS-stocknr. 363-8614
  • Fabrikantnummer 0970006261502
  • Fabrikant HARTING
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Han® Module

Nominal current 10 A.
Nominal voltage: 25 V.
Available with 6 → 20 poles.

Approvals

  UL, CSA, BVS, SEV,
CERCHAR, etc.

Han A® 10A to 16A Screw Series

These Han A® inserts are available in 10A and 16A current ratings. They are intended for use typically with hoods and housing; RS stock Nos. 114-8024, 181-0662 and 181-0690 and the associated ranges. These hoods and housings are associated to a specific Harting 'Size' number.

Specificaties
Kenmerk Waarde
Current Rating 10A
Series Staf
Voltage Rating 50 V
Termination Method Solder
12 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
11,37
(excl. BTW)
13,76
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
11,37 €
5 +
11,14 €
Related Products
A miniature range of screw terminals designed for ...
Description:
A miniature range of screw terminals designed for mounting onto symmetric rail. The terminals are moulded in tough flame-resistant nylon 6.6. The captive terminal screws have hardened heads to prevent burring. • Standard terminals (grey or blue) and earth terminals ...
Screw compression clamp terminals incorporating a spring under ...
Description:
Screw compression clamp terminals incorporating a spring under each wire clamp, giving high vibration resistance and also meets requirements of ESI 50//18. Each termination will accept two hook bladed crimp terminals, one locating on the current bar behind the screw ...
Miniature terminals, designed for mounting on 15 mm ...
Description:
Miniature terminals, designed for mounting on 15 mm symmetrical rail to BS 6273:1982 TS15. The range is ideally suited for use in terminal boxes or areas where space is at a premium. • Moulded in polyamide 6.6 with tin plated ...
A range of multi-level terminal blocks from Phoenix ...
Description:
A range of multi-level terminal blocks from Phoenix Contact for the rational wiring of modern machine controls.The terminal blocks are designed for mounting on flat top hat rail to DIN EN 50 022. • All three wires in parallel on ...