Entrelec, SNA Series , 800 V ac Standard Din Rail Terminal, Screw Clamp Termination

  • RS-stocknr. 303-6412
  • Fabrikantnummer 1SNA115320R2700
  • Fabrikant Entrelec
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

Spring Loaded Terminal (Feedthrough and Test)

Screw compression clamp terminals incorporating a spring under each wire clamp, giving high vibration resistance and also meets requirements of ESI 50//18. Each termination will accept two hook bladed crimp terminals, one locating on the current bar behind the screw clamp, the other on the underside of the clamp. For use with Top Hat DIN rails,2 and 4 pole sliding bridges are available for use with current transformer test terminal (stock no. 383-1403)

//media.rs-online.com/t_line/L303643-01.gif

Approvals

7777

5000 Universal Series

This universal range of terminals mounts on both asymmetric rail 'G' profile and Top hat profile. Moulded in tough flame-resistant polyamide 6.6, with a working temperature of -55°C to +130°C. The captive terminal screws have hardened heads to prevent burring. Cable entry and clamp design allows easy installation, higher voltage and cable carrying capacity. Cable markers are available RS 460-569

Note

Stock numbers 472-9569 and 472-9575 are compatible with deep top hat rails only

Specificaties
Kenmerk Waarde
Series SNA
Cable CSA 10mm²
Colour Grey
Current Rating 41A
Number of Levels Single
Termination Method Screw Clamp
Voltage Rating 800 V ac
Pitch 10mm
Minimum Operating Temperature -5°C
Maximum Operating Temperature +40°C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 23/06/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
3,27
(excl. BTW)
3,96
(incl. BTW)
Aantal stuks
Per stuk
1 +
3,27 €
Related Products
ABB series of double deck DIN Rail terminals ...
Description:
ABB series of double deck DIN Rail terminals with four independent screw clamp connections and are suitable for use with a wide range of cable size. • Space saving• Feed-through connection• Flexibility to snap onto symmetrical and asymmetrical DIN Rails. ...
Modular terminals with tension clamp connections – the ...
Description:
Modular terminals with tension clamp connections – the Z-Series – were specially designed to meet customers requirements: compact size, generous marking surfaces, integral test point, cross-connection options within the Z-Series and to other Weidmuller modular terminals.The Z-Series terminals have a ...
A range of screw clamp terminal blocks and ...
Description:
A range of screw clamp terminal blocks and accessories offering a 20% width reduction compared with the Entrelec 5000 series. Designed to mount on ’top hat’ format DIN rails using a unique asymmetrical profile which aids visibility from any direction ...
Feed-through terminal connections for mounting on DIN-type rails. ...
Description:
Feed-through terminal connections for mounting on DIN-type rails. These conductor-through terminals feature cage clamp® technology for ultra-quick connection. The terminal blocks are front-wired. Intermediate or end plates are also available. • 28-12 AWG• Cage Clamp Connection• 800 V measured ...