Wago, 260 Series , 400 V Modular Terminal Block, Clamp Termination

  • RS-stocknr. 297-3196
  • Fabrikantnummer 260-104
  • Fabrikant Wago
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Cage Clamp - 260 Series

Cage clamp® connection terminal blocks with side entry are screwdriver actuated and include fixing flanges at either end of the terminal block. A DIN Rail mounting adapter is also available which screw mounts into the base of the terminal blocks. It is recommended that the maximum distance between adapters is 35-40 mm.

Features and Benefits

• 2 Conductor-through terminal block
• 6 kV surge voltage
101-3877 is a mounting foot with screw for DIN 35 rail

260 Series

Specificaties
Kenmerk Waarde
Series 260
Wire Size 28 → 16 AWG
Cable CSA 0.08 → 1.5mm²
Colour Grey
Current Rating 18A
Number of Levels Double
Termination Method Clamp
Voltage Rating 400 V
Pitch 5mm
70 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
15 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
1,24
(excl. BTW)
1,50
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 +
1,24 €
6,20 €
*prijsindicatie
Related Products
The Optocoupler Terminal Block is a rail mounted ...
Description:
The Optocoupler Terminal Block is a rail mounted standard terminal block with miniature switching relay and optocoupler for low switching power. 2.5mm squared conductor area, clamp wire connection methods, front-entry wiring type M and grey in colour. • Industrial.
Sectional terminal blocks with disconnect tab. • DIN ...
Description:
Sectional terminal blocks with disconnect tab. • DIN Rail mounting on TS 35 DIN Rail• 3 conductors (1 input, 2 outputs)• Quick connection using cage-type springs, not affected by impact and vibration• For rigid, semi-rigid and flexible conductors• Front wiring. ...
The Wago 859 series 24VDC terminal block is ...
Description:
The Wago 859 series 24VDC terminal block is an optocoupler module. It has cage clamp termination that provides optimal clamping force for large conductor cross-sections up to 185mm² (350kcmil). It can mount wire size 14AWG and cable CSA of 2.5mm². ...
Screw compression clamp terminals incorporating a spring under ...
Description:
Screw compression clamp terminals incorporating a spring under each wire clamp, giving high vibration resistance and also meets requirements of ESI 50//18. Each termination will accept two hook bladed crimp terminals, one locating on the current bar behind the screw ...