Omron, XW5G Series , 500 V Screw Terminal, Screw Termination

  • RS-stocknr. 123-7820
  • Fabrikantnummer XW5G-S4.0-1.2-1
  • Fabrikant Omron
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

DIN Rail Screw Terminal- XW5T-S & XW5G-S Series

DIN Rail grounding terminal blocks are a great solution for space saving and downsizing in control panels, due to their compact size of 3.5 mm width. The XW5G series terminal blocks are easy to install and wires are held firmly and securely in place.

Features and Benefits

• Slim 3.5 mm width
• Wires held with screws
• Light insertion force and strong holding strength for less wiring work and high reliability
• Hands-free structure that holds an inserted screwdriver to achieve easier wiring in comparison to attaching crimp terminals
• 1 or 2 tier models available

DIN Rail Terminal Blocks

Specificaties
Kenmerk Waarde
Series XW5G
Wire Size 20 → 12 (with Ferrule) AWG, 26 → 10 AWG
Cable CSA 4mm²
Colour Grey
Number of Levels Single
Termination Method Screw
Voltage Rating 500 V
Minimum Operating Temperature -40°C
Maximum Operating Temperature +55°C
20 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
3,94
(excl. BTW)
4,77
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 +
3,94 €
39,40 €
*prijsindicatie
Related Products
A miniature range of screw terminals designed for ...
Description:
A miniature range of screw terminals designed for mounting onto symmetric rail. The terminals are moulded in tough flame-resistant nylon 6.6. The captive terminal screws have hardened heads to prevent burring. • Standard terminals (grey or blue) and earth terminals ...
This universal range of terminals mounts on both ...
Description:
This universal range of terminals mounts on both asymmetric rail 'G' profile and Top hat profile. Moulded in tough flame-resistant polyamide 6.6, with a working temperature of -55°C to +130°C. The captive terminal screws have hardened heads to prevent burring. ...
DIN rail mounted terminals, with universal mounting foot ...
Description:
DIN rail mounted terminals, with universal mounting foot clips to both ’G’ profile (asymmetric to BS5825:1990) and ’top hat’ profile (symmetric to BS5584:1978) rails, with a range of features to suit all applications. The 2.5 to 10mm² terminals have common ...
Grey for standard circuit, blue for neutral conductor, ...
Description:
Grey for standard circuit, blue for neutral conductor, orange for circuit not broken by the master isolating device, red for special circuits (safety, protected, etc), green for protection conductor class II equivalent assemblies. Used to make the electrical connection between ...