Omron, XW5G Series , 1 kV Screw Terminal, Screw Termination

  • RS-stocknr. 123-7814
  • Fabrikantnummer XW5G-S10-1.1-1
  • Fabrikant Omron
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

DIN Rail Screw Terminal- XW5T-S & XW5G-S Series

DIN Rail grounding terminal blocks are a great solution for space saving and downsizing in control panels, due to their compact size of 3.5 mm width. The XW5G series terminal blocks are easy to install and wires are held firmly and securely in place.

Features and Benefits

• Slim 3.5 mm width
• Wires held with screws
• Light insertion force and strong holding strength for less wiring work and high reliability
• Hands-free structure that holds an inserted screwdriver to achieve easier wiring in comparison to attaching crimp terminals
• 1 or 2 tier models available

DIN Rail Terminal Blocks

Specificaties
Kenmerk Waarde
Series XW5G
Wire Size 20 → 6 AWG, 20 → 8 (with Ferrule) AWG
Cable CSA 10mm²
Colour Grey
Number of Levels Single
Termination Method Screw
Voltage Rating 1 kV
Minimum Operating Temperature -40°C
Maximum Operating Temperature +55°C
40 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
5,48
(excl. BTW)
6,63
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 +
5,48 €
54,80 €
*prijsindicatie
Related Products
Grey for standard circuit, blue for neutral conductor, ...
Description:
Grey for standard circuit, blue for neutral conductor, orange for circuit not broken by the master isolating device, red for special circuits (safety, protected, etc), green for protection conductor class II equivalent assemblies. Used to make the electrical connection between ...
A 2 tier terminal, enabling higher density wiring ...
Description:
A 2 tier terminal, enabling higher density wiring on the rail. The WDK2.5 is a standard feed through while the WDK2.5V has a commoning bar connecting upper and lower tiers. All materials comply with RoHS requirements and have been tested ...
UTI series terminal blocks have a low vertical ...
Description:
UTI series terminal blocks have a low vertical height profile making them ideal for space restricted applications. They also feature a quick install bus bar option that reduces installation time. Low profile, only 58mm high on standard TS35 DIN railSupports ...
Universal terminals moulded in polyamide to fit both ...
Description:
Universal terminals moulded in polyamide to fit both 'G' and 'Top Hat' rail.Screw conductor securing with closed screwdriver shafts. Available conductor acceptance sizes, 2.5mm² to 35mm². The range comprises of grey (phase), blue (neutral), and yellow/green (earth) terminals. A 10-way ...