Weidmuller, AKZ Series , 400 V Standard Din Rail Terminal, Screw Down Termination

  • RS-stocknr. 823-342
  • Fabrikantnummer AKZ 4 -294360000
  • Fabrikant Weidmuller
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: RO
Productomschrijving

AKZ Miniature Series

Miniature terminals, designed for mounting on 15 mm symmetrical rail to BS 6273:1982 TS15. The range is ideally suited for use in terminal boxes or areas where space is at a premium.

Features and Benefits

• Moulded in polyamide 6.6 with tin plated brass contacts
• Suited to a temperature range of -50°C to +100°C

Note

Voltage and current ratings are with respective to VDE

Approvals

(1) CSA certified, (2) UL recognised

Approvals

1,2

AKZ Miniature Series

Approvals

(1) CSA certified, (2) UL recognised

Warning

  • Isolating terminals must only be used for isolating sections of a circuit for test purposes. They must NOT be used to switch services on or off when power is applied.
Specificaties
Kenmerk Waarde
Series AKZ
Wire Size 24 → 12 AWG
Cable CSA 4mm²
Colour Brown
Current Rating 41A
Number of Levels Single
Termination Method Screw Down
Voltage Rating 400 V
Minimum Operating Temperature -50°C
Maximum Operating Temperature +100°C
480 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
2570 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
1,266
(excl. BTW)
1,532
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 +
1,266 €
12,66 €
*prijsindicatie
Related Products
A 2 tier terminal, enabling higher density wiring ...
Description:
A 2 tier terminal, enabling higher density wiring on the rail. The WDK2.5 is a standard feed through while the WDK2.5V has a commoning bar connecting upper and lower tiers. All materials comply with RoHS requirements and have been tested ...
Test-disconnect terminal block allows the disconnection of the ...
Description:
Test-disconnect terminal block allows the disconnection of the termination points on each side of the terminal for test purposes only. The terminal has clamping yoke technology that makes planning easier and optimises operational safety. • Slim, space-saving design• Isolating, 2-in ...
Versatile and extensive test-disconnect terminal blocks are made ...
Description:
Versatile and extensive test-disconnect terminal blocks are made from hardened steel for mechanical strength and tinned copper for optimum conductivity. The screwdriver actuated lever can be removed to prevent unauthorised reconnection of the circuit. Pluggable cross connect Screw connection Clamping ...
One key advantage of the W-Series is the ...
Description:
One key advantage of the W-Series is the choice of plug-in (ZQV) or screw-in (WQV) cross-connections within one modular terminal. Saving substantial time in comparison to other screw terminals. Terminals available in a range of coloursScrew-in and a plug-in cross ...