RE27 Magnetic Safety Switch, Plastic, 30 V dc

  • RS-stocknr. 797-4879
  • Fabrikantnummer RE27-SA10L
  • Fabrikant Sick
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: MY
Productomschrijving

SICK RE1 & RE2 Series of Non-Contact Safety Switches

RE1 & RE2 magnetic safety switches are equipped with NC/NO contacts or equivalent N/O contacts which are treated directly with coded magnetic actuators. These types of safety system switches are particularly useful in areas where there may be a high level of contamination (these units are simple to clean and keep high hygiene standards).

Features and Benefits

• Response range from 7-9 mm.

• Magnetic sensor principle.

• Built-in LED response indicator.

• Performance level up to PL e / Cat. 4 (EN ISO 13849).

• Glass-fibre reinforced PPS rectangular housing.

• High tolerances for door misalignment.

• 2-3 contacts (see specifications).

• Enclosure rating IP67 (IEC 60529).

Typical applications

The RE1&2 series are compatible anywhere where a high standard of hygiene is necessary for operations. Typically, you'll find these types of safety switches where precise guidance of a safety door isn't always possible.

• Monitoring of safety doors & removable guards.

• Applications requiring a high standard of hygiene.

Note

The actuators are only coded in the sense that they have an identical magnetic combination making them type specific not individual example specific.

Specificaties
Kenmerk Waarde
Supply Voltage 30 V dc
Safety Contacts 3NO
Housing Material Plastic
Connection Type M12
Switch Type Rectangular
Terminal Type Cable
Series RE27
Switching Distance 20 (Off) mm
IP Rating IP67
Actuator Included Yes
Depth 13mm
Sensor Principle Magnetic
Actuator Type Magnetic
Width 25mm
Length 87.5mm
Dimensions 87.5 x 25 x 13 mm
Number of Approach Directions 3
Safety Category 4
7 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
44 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
57,20
(excl. BTW)
69,21
(incl. BTW)
Aantal stuks
Per stuk
1 +
57,20 €
Related Products
Smallest designActuation only possible with BPS260, available separatelyLeft-hand ...
Description:
Smallest designActuation only possible with BPS260, available separatelyLeft-hand or right-hand side versions for door-mountingControl category up to 4 to EN954-1IP67 protection Connector 8 mm, 6-pole, latching interlockingDimensions: L13 x W26 x H36 mm.
Mounting dimensions identical to best-selling AZ163 cable entries ...
Description:
Mounting dimensions identical to best-selling AZ163 cable entries M20 x 1.5IP67 protectionControl category up to 4 to EN954-1Suitable for food processing industryDimensions: L39 x W52 x H90 mm.
Substitutes door handle and safety switch in one ...
Description:
Substitutes door handle and safety switch in one IP67 rated unit, no further door fittings requiredIdeal for small and light movable guards (rotating doors max. 5kg, sliding doors max. 3kg) Tamper-proof due to integral coded safety sensorControl category up to ...
The Pilz PSENcode series non-contact safety switch has ...
Description:
The Pilz PSENcode series non-contact safety switch has an assured switching distance of 15mm. It has 2OSSD RFIDsafety outputs. It is coded and the only switch with an actuator from the PSEN cs3.1 series. Supplied with: ActuatorCaution: EN60947-5-3 standard is ...