Preventa XCSDMP Magnetic Safety Non Contact Switch, Plastic, 24 V dc

  • RS-stocknr. 133-0079
  • Fabrikantnummer XCSDMP501L01M12
  • Fabrikant Telemecanique
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

XCS-DMC/XCS-DMP Coded Magnetic Switches, Rectangular

XCS-DM coded magnetic safety switches are designed for monitoring the doors, covers and guards of industrial machines with imprecise guiding and low inertia. These safety switches are ideally suited for machines subjected to frequent washing or liquid spray. They protect the operator by immediately stopping any dangerous movement as soon as the distance between the switch and its magnet is greater than 8mm (5mm for XCS-DMC).
XPS-DM safety modules are specifically designed for monitoring the coded magnetic safety switches. When the XCS-DM safety switch is used in conjunction with the XPS-DM safety relay they offer a certified safety solution for guard monitoring.

Coded magnetic safety switch

Actuation on 3 sides: face to face and face to side
8mm tolerance to misalignment (5mm for XCS-DMC)
LED versions have an LED in series with one N/C giving indication when guard is closed
Coded reed technology - switch cannot be totally defeated by a simple magnet
Rectangular plastic housing
Dimensions: compact: H51 x W16 x D7mm, standard: H88 x W25 x D13mm
Available pre-cabled or with connector on flying lead
IP66/67 protection in accordance with EN/IEC 60529
ROHS compliant

Safety module

Allows multi-switch monitoring to Safety Category 4 solutions in accordance with EN954-1/ISO 13849-1
XPS-DMB can monitor 2 independent sensors and modules, XPS-DME can monitor 6 independent sensors and modules
2 safety outputs and 2 solid state outputs for signalling to the process PLC
LEDs on the front face provide information on the monitoring circuit status
Dimensions: H99 x W22 x D114mm
IP20 protection on terminals and IP40 protection on enclosure, in accordance with EN/IEC 60529

Note

With the appropriate monitoring system and correctly wired these switches can reach safety category 4 conforming to EN/ISO 13849-1, PL e conforming to EN/ISO 13849-1, SIL 3 conforming to EN/IEC 61508.

Standards

IEC 947-1; EN 547-5-1; EN 547-5-3; EN 60204-1; EN 1088 (for Magnetic Switch only)
IEC 204-1; EN 292; EN 60204-1; EN954-1; EN1088 (for Safety Module only)

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Safety Contacts 1NC/2NO
Housing Material Plastic
Connection Type M12
Switch Type Rectangular
Range Preventa
Terminal Type M12 Conduit
Series XCSDMP
Switching Distance 8 (Operating) mm, 20 (Tripping) mm
IP Rating IP67
Supply Current ≤100 A
Actuator Included Yes
Depth 88mm
Sensor Principle Magnetic
Safety Category Category 4 (EN/ISO 13849-1), Category PL e (EN/ISO 13849-1), Category SIL 3 (EN/IEC 61508)
Actuator Type Coded
Dimensions 25 x 13 x 88 mm
Standards Met BG, CSA, CSA C22.2 No. 14, EN/IEC 60204-1, EN/IEC 60947-5-1, EN/ISO 12100, UL, UL 508
Width 13mm
Number of Approach Directions 3
Housing Colour Red
Length 25mm
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
2 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
92,70
(excl. BTW)
112,17
(incl. BTW)
Aantal stuks
Per stuk
1 +
92,70 €
Related Products
With no need for a separate safety relay ...
Description:
With no need for a separate safety relay this device saves space in the cabinet with no loss of functionality and is easy to install. provides Cat 3//4 or SIL 2//3 protection on moveable machine guards or where frequent washdown ...
The Telemecanique Sensors XCSDM series safety switch is ...
Description:
The Telemecanique Sensors XCSDM series safety switch is magnetically coded. The built-in safety relay enables the switch to self-check and detects its failure without the use of an external safety relay. It can directly drive external contactors to directly and ...
Ex coded magnetic safety switches can be used ...
Description:
Ex coded magnetic safety switches can be used in potentially explosive DUSTY or GASEOUS environments for safety applications, for example on machines fitted with small guards or covers (with loose alignment), packaging machines, food and beverage processing (sugar refinery, malt ...
The Omron F3S-TGR-N_C series non-contact switch has a ...
Description:
The Omron F3S-TGR-N_C series non-contact switch has a switching distance of 17mm and 24VDC supply voltage. This is an elongated sensor type with M12, 8-pin cable connection. It has 2 normally closed contacts and 1 normally open contact. This switch ...