Sensaguard 440N RFID Safety Switch, Plastic, 24 V dc

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Allen Bradley Guardmaster RFID Safety Switch

The Allen Bradley Guardmaster 440N series RFID safety switch has a supply voltage rating of 24VDC and the maximum sensing distance of 10mm. This switch comes with a plastic rectangular sensor, rectangular actuator, 6inch pigtail and 8-pin micro M12 connector. It features the latest generation of RFID technology for coding and inductive technology for sensing. This switch has a large sensing range and tolerance to misalignment. It is a cost-effective solution that is ideally suited for a wide range of industrial safety application.

Note:
Stainless steel is a version suitable for use in harsh environments.
Supplied with actuator

Features and Benefits

Short-circuit and over-voltage protection
Provide two PNP outputs and one auxiliary PNP
Sensing range of 10%
LED is located on the switch for door status and troubleshooting
Adjustable magnetic latch force 20…60N
Designed for easy mounting on aluminium profile
No dedicated controller is required
Switches can be connected in series with other devices (light curtain, E-stops, key interlock switches)
Extended diagnostics for easy troubleshooting
Multiple sensing directions
Uses the standard proximity bracket

Applications

Sliding
Hinge
Lift-off machine guard doors

Certifications

IP69K rated
IEC60947-5-3
IEC61508
EN954
CE certified
UL listed
TUV certified

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Housing Material Plastic
Switch Type Safety
Range Sensaguard
Interface Guardlink
Terminal Type Cable
Series 440N
Switching Distance 15 mm
IP Rating IP69K
Actuator Included Yes
Sensor Principle RFID
Safety Category 4
Actuator Type Coded
Dimensions 88.14 x 24.99 x 20.65 mm
Housing Colour Red
Width 24.99mm
Length 88.14mm
Depth 20.65mm
44 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
92,30
(excl. BTW)
111,68
(incl. BTW)
Aantal stuks
Per stuk
1 +
92,30 €
Related Products
The Ferrogard FRS 6, 9 and 10 are ...
Description:
The Ferrogard FRS 6, 9 and 10 are magnetically actuated non-contact safety switches which offer reliability and a high tolerance to misalignment. Designed to be installed on a guard door, the action of the magnetic actuator being removed from the ...
The SensaGuard Non-Contact Switch is PLe, SIL 3 ...
Description:
The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive ...
The Ferrogard FRS 1, 2, 20 and 21 ...
Description:
The Ferrogard FRS 1, 2, 20 and 21 are magnetically actuated non-contact safety switches which offer reliability and a high tolerance to misalignment. Designed to be installed on a guard door, the action of the magnetic actuator being removed from ...
The Pilz PSENmag series non-contact safety switch has ...
Description:
The Pilz PSENmag series non-contact safety switch has an assured switching distance of 8mm with round M30 design. It has 2NO safety contacts. It meets the highest safety requirements and offers a complete solution that is safe and economical. Supplied ...