Fluke TP81 Insulation Piercing Clip Set

Brought to you by Fluke, a range of accessories, including test leads and test probes suitable exclusively for Fluke Multimeters. Whether it's a test lead or a probe set, dependent on the application, all accessories will add a sense of reliability to the intended application. All models are highly reliable and excellent quality.

• Durable connection, which guarantees excellent results
• Fantastic electronic set
• CAT II 300 V
• Insulated wires

These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.

Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision

• 1.0m silicone lead terminated at one end with 4mm shrouded right angled plug and stainless steel test probe on the other end. Rated 10A
• Insulated crocodile clip. Rated 5A
• Insulated probe tip extender. Rated 3A
• 1.0m silicone modular test lead terminated at one end with 4mm shrouded right angled plug and straight 4mm on the other end. Rated 10A
• Modular hook-style clip test lead with 4mm connector. Rated 5A
• Modular pinch style clip with 4mm connector. Rated 5A
• Modular crocodile clip with 4mm connector. Rated 5A
• Slide on IC probe tip adaptor (rated 3A) and test lead couplers
• 2 bare spade plugs with 4mm connectors, rated up to 10A, 60V dc max
• TL81A contents 2 each (1 red and 1 black)

Want to skip straight to taking electrical measurements without the hassle of stripping your wire? Get stuck in with this insulating piercing clip set from FLUKE. Simply pop the pair of clips straight onto a pair of 4mm banana-plug multimeter test leads, then use the needles to pierce your test cable's insulation. This method lets you make contact with the conductor inside without exposing it, reducing the risk of accidental shorting. As the probes are made from durable stainless steel, they're all set to provide you with a long service life.

• Compatible with any digital multimeter and banana jack leads for ease of use
• Tested up to 60V DC, for safe use in powerful electrical systems
• Adjustable piercing depth to minimise damage to your insulation
• Stainless-steel probes resist corrosion to limit wear in humid work areas
• Clips are colour-coded red and black for easy identification

• Fuel injectors
• Sensing equipment
• Large drive systems

The needles on the clips are designed to pierce insulation on 14, 16 and 18-gauge wires, so this product is highly versatile.

’Buy a Fluke, Get one Free’ is back!!
Between March 1st, 2024 and August 31st, 2024, the customer spends €150 or more on a qualifying Fluke product (Fluke Industrial, Fluke Calibration, Fluke Networks, or Beha-Amprobe).
Customer claims their tool online at: www.fluke.com/en/freefluke
A proof of purchase in the form of a receipt or invoice is required.
Note: Offer not available in South Africa