RS PRO Multimeter Test Lead Test Lead Kit Automotive Back Probe

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

RS PRO Easy Access Back Probe Set, Black & Red

Brought to you by RS PRO, these red & black extended back probes have a 44 mm long durable spring steel contact. Perfect for automation applications. All models are highly reliable and excellent quality.

Features and Benefits

• 4 Colour (Black, Blue, Green, Red & Yellow)
• 1 mm (0.039") O.D. Back Probe Pins
• Supplied with a protective cap
• Incorporates a 4 mm socket, compatible with all industry standard 4 mm test leads

What are test probes?

Connecting to RS PRO multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by RS PRO, each probe provides much-needed precision.

What are the differences between safety categories?

For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT II, CAT III), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT III 1000 V, provides a higher degree of protection than a CAT III 600 V probe.

RS PRO Extended Back Probe Set, Black & Red

The RS Pro Red & Black extended back probe set is ideal for a multimeter test, featuring a high quality and durable automotive back probe set, which includes a 44 mm long durable spring steel contact. Incorporating a 4mm socket compatible with all industry standard 4mm test leads. The extended back probes have a voltage of < 30 V r.m.s. and a 10 amp current rating.

Features and Benefits:

• 4 Colour (Black, Blue, Green, Red & Yellow)
• 1 mm (0.039") O.D. Back Probe Pins
• Supplied with protective cap
• Incorporates a 4 mm socket, compatible with all industry standard 4 mm test leads
• Ideal for use with RS PRO multimeter test set

What are back probe sets used for?

The RS PRO Multimeter Probe is used for electrical test probes on a wire in a connector that is plugged into a component. With a minimum operating temperature of ‐20°C and maximum of +70°C , they are the perfect accessory for multimeter kits when testing voltage, current and resistance.

RS Pro

Specificaties
Kenmerk Waarde
Lead Type Test Lead Kit
Product Type Automotive Back Probe
Current Rating 10A
Minimum Operating Temperature -20°C
Maximum Operating Temperature +70°C
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
12 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs 1 Pair
11,23
(excl. BTW)
13,59
(incl. BTW)
Pair(s)
1 +
11,23 €
Related Products
A 1.2m fused test lead set from our ...
Description:
A 1.2m fused test lead set from our RS PRO range offering a high degree of protection to the user when measuring on high energy circuits up to 1000V CAT III. The leads are available with either straight 4mm plugs ...
Blue, yellow and red leads with retractable shroud ...
Description:
Blue, yellow and red leads with retractable shroud plugs3 phase voltage or continuity measurementsProbes are rated at 600 V CAT III and fitted with a 50 kA, 1000 V, 500 mA fuse to protect against electrical arcsEach probe is fitted ...
RS Pro back probe pin set made from ...
Description:
RS Pro back probe pin set made from durable steel. Perfect for connecting to fuel injectors, MAP and TPS sensors and any weather pack seal type connectors. The modular design is compatible with any industry-standard, 4 mm plug whether shrouded ...
Our lead sets are usually supplied packed in ...
Description:
Our lead sets are usually supplied packed in a plastic wallet. All 4mm plugs are shrouded and touchproof. We have three kinds of standard, double-insulated cable, rated 1KV (PVC), 5KV and 12KV (silicone). Available in black, red, green, blue, brown ...