Hirschmann Test & Measurement 932793001 Test Equipment Set

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: DE
Productomschrijving

Hirschmann Test & Measurement Multimeter Safety Probe Set

Brought to you by Hirschmann Test & Measurement. A high-quality 4 mm test lead set ideal for general laboratory use. Connecting to multimeters, these test leads and probes provide excellent precision within electronic readings. All models are highly reliable and excellent quality.

Features and Benefits

• 4 mm plugs
• Gripper and hard point test probes
• 1m lead length
• Maximum working voltage - 60 V dc

What are test leads?

These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.

What are test probes?

Connecting to multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Hirschmann Test & Measurement, each probe provides much-needed precision.

What are the differences between safety categories?

For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT II, CAT III), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT III 1000 V, provides a higher degree of protection than a CAT III 600 V probe.

Kit Contents

• Red and black hard point test probes
• Red and black gripper test probes
• Red and black crocodile clips (clasping dia. 9.5 mm)
• Red and black PVC 1m stackable test leads

Red and black hard point test probes
Red and black gripper test probes
Red and black crocodile clips (clasping dia. 9.5mm)
Red and black PVC 1m stackable test leads
Maximum working voltage 60V d.c.

High quality 4mm test lead set ideal for general laboratory use.
Contents:

Specificaties
Kenmerk Waarde
Lead Type Test Equipment Set
Connector Type Crocodile Clip, Spring Loaded Plug
Lead Length 1m
Minimum Operating Temperature -15°C
Maximum Operating Temperature +70°C
85 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
245 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
26,09
(excl. BTW)
31,57
(incl. BTW)
Aantal stuks
Per stuk
1 +
26,09 €
Related Products
MetraHit digital multimeters are suitable for universal with ...
Description:
MetraHit digital multimeters are suitable for universal with various applications. An excellent multimeter for using in the field as it is equipped an internal and mains-independent power supply. Automatic shut-down takes place when any measured values remain unchanged for any ...
The FLIR DM93 is a digital multimeter with ...
Description:
The FLIR DM93 is a digital multimeter with advanced VFD filtering to help you accurately analyze non-traditional sine waves and noisy signals found in VFD-controlled equipment. VFD Mode filters variable frequency drive signals and provides accurate voltage and frequency measurements ...
Save money when you buy the Fluke 289 ...
Description:
Save money when you buy the Fluke 289 Multimeter and the IR3000 FC Connector Fluke CONNECT™ together in this great value bundle.Fluke 289 Multimeter with built-in data logger and Trendapture™ capability, helping you to track down elusive, intermittent problems or ...
The FLIR DM284 and DM285 are industrial, all-in-one ...
Description:
The FLIR DM284 and DM285 are industrial, all-in-one True RMS digital multimeters and thermal imagers that can show you exactly where a hot spot or temperature anomaly is for faster troubleshooting. Featuring Infrared Guided Measurement (IGM™) powered by a built-in ...