RS PRO Fused Probe Kit, Fused, 1000 CAT III V, 600 CAT III V

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

RS PRO Fused Test Leads 1000V CAT III

A 1.2m fused test lead set from our RS PRO range offering a high degree of protection to the user when measuring on high energy circuits up to 1000V CAT III. The leads are available with either straight 4mm plugs with retractable shroud, or with right-angled shrouded plugs. Test leads for multimeters are used to test voltage, current, capacitance and other types of testing.

Supplied in a plastic wallet, this test lead kit is available with straight or right-angled 4mm plugs and is suitable for use with most multimeters and insulation testers.
204-583 - Fused right-angled test lead set
204-599 - Retractable Straight Plug

Before making any voltage measurements, check the continuity of the leads to ensure that the fuses are intact.

RS PRO have a wide range of test leads, multimeters and accessories that have been RS approved meaning that the products are value for money and high-quality you can rely on. Replacement fuses can be purchased please see RS Stock no. 161-1530.

Features and Benefits:

Each lead is fitted with a 500mA 1000V 50kA HRC fuse within totally touch proof integral fuse holders
High-quality silicone insulated cable, resistant to heat, chemicals, oils and abrasions, with yellow inner insulation to serve as a wear indicator
Large screw-in crocodile clips with a 20mm jaw opening with integral finger guards rated 600V CATIII
Strain relief is provided at each end of the leads.
Also available:
Thin fine insulated prods set 2627770 for use with fused test prods and multimeter test lead sets.
Shuttered lantern probe set 2627786 for use with fused test prods and multimeter test lead sets.

Typical applications

Test leads play an important part in electrical measurement especially when connecting a digital multimeter to the unit under test.
Test and Measurement

Safety Precautions

Always inspect the test probes for cracks and frayed leads before each use. If defects are found, do not use the probe.

Note

Right angled versions are not recommended for use with Megger BM100, BM101, Thurlby 1905, 1503, Fluke 8010, 8050, Wavetek DM25XL, DM93, DM98, AVO 8, AVO 2001 and ITT MX112 multimeters. For these models straight versions are more suitable.

Standards

GS38

Specificaties
Kenmerk Waarde
Lead Type Fused Probe Kit
Connector Type Straight Plug
Fused Yes
Lead Length 1.2m
Safety Category Voltage 600, 1000 V
Safety Category 600 CAT III V, 1000 CAT III V
Minimum Operating Temperature -10°C
Maximum Operating Temperature +150°C
Safety Category Level CAT III
111 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
Was 50,02 €
45,27
(excl. BTW)
54,78
(incl. BTW)
Aantal stuks
Per stuk
1 +
45,27 €
Related Products
Supplied with 200A ac current clamp for safe, ...
Description:
Supplied with 200A ac current clamp for safe, non intrusive current measurement9 dc voltage ranges from 150mV to 1500V (Cat I) 2% accuracy 20kΩ/V9 ac voltage ranges from 5 to 1500V (Cat I) 2.5% accuracy, 2kΩ/V4 ac current ranges via ...
The 2707B is a full-featured manual ranging true ...
Description:
The 2707B is a full-featured manual ranging true RMS DMM that combines performance, value and functionality. The 2000 count LCD can display resistance values up to 2 Gohm, capacitance to 20 uF, or a transistors common-emitter gain value up to ...
IEC Cylindrical Fuse HoldersMersen offer a comprehensive range ...
Description:
IEC Cylindrical Fuse HoldersMersen offer a comprehensive range of Modulostar fuse-holders. All of the fuse-holders offer finger-safe to IEC standards at IP20 protection , they also offer easy fuse changing. Suitable applications include protection for motors, transformers, low voltage distribution, ...
A brand new economical solution for 90° Shoulder ...
Description:
A brand new economical solution for 90° Shoulder Milling in Carbon Steel, Stainless Steel and Cast Iron. These End Mill kits feature TNGX double-sided inserts that have 6 cutting edges making them extremely cost effective. The Face Mill and End ...