Murata LQG15HS Series 2.2 nH ±0.3nH Wire-Wound Surface Mount Inductor, 1005 Case, SRF: 6GHz Q: 8 300mA dc 120mΩ Rdc

  • RS-stocknr. 811-9650
  • Fabrikantnummer LQG15HS2N2S02D
  • Fabrikant Murata
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Murata 0402 LQG15HS Series High Frequency Chip Inductors

LQGH15HS inductors from Murata are general use multilayer surface mount inductors. Despite a lower Q factor than wire wound equivalents, the multilayer construction provides excellent balance between rated current, size and L value tolerance among others.

LQGH15HS SMD inductors are highly reliable and suitable for application in chokes, WLAN networks, RF circuit matching and mobile communication equipment resonance.

Can be used in high frequency circuits
Lower DC resistance enables devices to use less power
Stable at high frequencies

Specificaties
Kenmerk Waarde
Series LQG15HS
Inductance 2.2 nH
Tolerance ±0.3nH
Maximum DC Current 300mA
Maximum Self Resonant Frequency 6GHz
Minimum Quality Factor 8
Package/Case 1005
Maximum DC Resistance 120mΩ
Dimensions 1 x 0.5 x 0.5mm
Depth 0.5mm
Height 0.5mm
Length 1mm
Maximum Operating Temperature +125°C
Inductor Construction Wire-Wound
Minimum Operating Temperature -55°C
9100 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Bag of 100)
0,034
(excl. BTW)
0,041
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
100 +
0,034 €
3,40 €
*prijsindicatie
Verpakkingsopties
Related Products
Applications: Mains filters, power electronics, switched-mode power supply ...
Description:
Applications: Mains filters, power electronics, switched-mode power supply units. Dual toroidal-core chokes for use in mains filter circuitsThe high-quality core material allows suppression over a wide frequency range4-pin housingToroidal-core chokes with segment windingGood suppression of common-mode interference ...
Wurth Elektronik WE-PMI series multilayer surface mount inductor ...
Description:
Wurth Elektronik WE-PMI series multilayer surface mount inductor is compact and magnetically shielded to suppress cross talk. These multilayer inductors are suitable for use in high current applications up to 2.5A, DCR values below 0.2 Ω, Operating temperature range: -40°C ...
By using metal magnetic material with high Saturation ...
Description:
By using metal magnetic material with high Saturation magnetic flux density the excellent DC bias characteristics needed for inductors for power circuits can be achieved. With the same product shape and terminal structure as general chip parts it has excellent ...
Wurth WE MI high-quality multilayer surface mount inductor ...
Description:
Wurth WE MI high-quality multilayer surface mount inductor is magnetically screened and has a low dc resistance. These multilayer inductors have excellent soldering properties, small temperature drift and feature a wide inductance spectrum. The inductors have a maximum packing density ...