Fluke 1664FC Multifunction Tester, 50 V, 100 V, 250 V, 500 V, 1000 V , Earth Resistance Measurement With BLE, USB
- RS-stocknr.:
- 117-6667
- Fabrikantnummer:
- FLK-1664FC SCH
- Fabrikant:
- Fluke
- RS-stocknr.:
- 117-6667
- Fabrikantnummer:
- FLK-1664FC SCH
- Fabrikant:
- Fluke
Wetgeving en conformiteit
N.v.t.
- Land van herkomst:
- GB
Productomschrijving
FLUKE Multifunction Tester, LCD Digital Screen, 1000A Prospective Earth Fault Current Range - 1660 Series - FLK-1664FC SCH
Need a single solution to measure multiple electrical values? Grab this multifunction tester from FLUKE to check the health of your circuits and safeguard equipment and people. With its 500V CAT III and 300V CAT IV ratings, the unit has the capacity to handle high-voltage installations. An insulation pre-test function senses linked appliances and stops a test if there's a risk of system damage. Selecting desired parameters is simple with the easy-to-use rotary dial, which eliminates the need to flip through complicated multi-level menus.
Features & Benefits
• Automatically runs up to seven installation tests during a single sequence for efficiency
• Fast and convenient voltage measurements without changing connections
• LCD screen with wide angle for clear reading
• Fast and convenient voltage measurements without changing connections
• LCD screen with wide angle for clear reading
Applications
• Laboratories
• Power plants
• Medical systems
• Power plants
• Medical systems
Can I hook this multifunction tester up to my phone?
Yes, it has BLE and USB connectivity for easy data sharing. This device also comes with Fluke Connect, making it possible to send and share results for collaborative working.
Is this multifunction tester easy to handle in the field?
Yes, it's a lightweight unit of only 1.3kg and comes with a padded neckstrap so your hands are free to get on with the job.
Buy a Fluke, Get one Free is back!!
Between March 1st, 2024 and August 31st, 2024, the customer spends €150 or more on a qualifying Fluke product (Fluke Industrial, Fluke Calibration, Fluke Networks, or Beha-Amprobe).
Customer claims their tool online at: www.fluke.com/en/freefluke
A proof of purchase in the form of a receipt or invoice is required.
Note: Offer not available in South Africa
Between March 1st, 2024 and August 31st, 2024, the customer spends €150 or more on a qualifying Fluke product (Fluke Industrial, Fluke Calibration, Fluke Networks, or Beha-Amprobe).
Customer claims their tool online at: www.fluke.com/en/freefluke
A proof of purchase in the form of a receipt or invoice is required.
Note: Offer not available in South Africa
Specificaties
Kenmerk | Waarde |
---|---|
Loop Impedance Test Type | Phase to Earth, Phase to Neutral |
Automatic RCD Test | Yes |
RCD Ramp Test | Yes |
Model Number p | 1664FC |
Insulation Test Voltage | 50 V, 100 V, 250 V, 500 V, 1000 V |
Maximum Voltage Measurement | 500V ac/dc |
Earth Resistance Measurement | Yes |
Downloadable Data | Yes |
Interface Type | BLE, USB |
Continuity Test Current | 10mA |
RCD Test Type | A/F, AC Type, B/B+, G, S |
Remote Switch Mode | Yes |
IP Rating | IP40 |
Minimum Continuity Resistance | 20Ω |
Dimensions | 100 x 250 x 125mm |
Power Source | Battery |
Length | 100mm |
Width | 250mm |
Safety Category | CAT III 500 V, CAT IV 300 V |
Safety Category Voltage | 300 V, 500 V |
Maximum Continuity Resistance | 2000Ω |
Safety Category Level | CAT III, CAT IV |
Weight | 1.3 (with Battery)kg |
Height | 125mm |
Battery Type | AA |
Display Type | LCD |