DIN Rail Holder for use with 5SV8 Series

  • RS-stocknr. 772-1224
  • Fabrikantnummer 5SV8900-1KK
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: ES
Productomschrijving

5SV8 Residual Current Monitors

Residual current monitors (RCMs) perform a wide range of functions for protecting people and machine, they enable the detection of system malfunctions and facilatate troubleshooting before the protective device is switched off, which increases plant and operating safety, and cuts costs.
These residual current monitors control an electrical installation for the presence of an unbalanced residual current and indicate when it exceeds a predetermined level. They can optionally be used for alarming and triggering switching devices.

Specificaties
Kenmerk Waarde
Accessory Type DIN Rail Holder
For Use With 5SV8 Series
3 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
Was 4,31 €
4,06
(excl. BTW)
4,91
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
4,06 €
5 - 9
3,89 €
10 +
3,76 €
Related Products
EPCOS P14/8 horizontal mounting assembly consists of a ...
Description:
EPCOS P14/8 horizontal mounting assembly consists of a terminal carrier and a yoke for snap in connection. Made of GFR polyterephthalate UL 94 V-0, insulation class to IEC60085, operating temperature to 155°C.
The set comprises of a terminal carrier and ...
Description:
The set comprises of a terminal carrier and a yoke which is made from GFR polyterephthalate UL 94 V -0, insulation class to IEC60085. Max operating temperature 155°C. Solderability to 60068-2-20. The yoke is a spring yoke and is made ...
B66359 coil former yokes are constructed from stainless ...
Description:
B66359 coil former yokes are constructed from stainless spring steel that is 0.33 mm thick. These yokes are designed for use with B66359 series coil formers and B66358 transformer ferrite cores from EPCOS.
FS-3EFD series Size 30/15/9 horizontal mounting potting box ...
Description:
FS-3EFD series Size 30/15/9 horizontal mounting potting box for use with size 30/15/9 ferrite cores and bobbins. The AL value in the table applies to a core set consisting of two cores without air gap Cores ETD conform to IEC ...