Norgren Bracket, For Manufacturer Series F64C

  • RS-stocknr. 184-4299
  • Fabrikantnummer 74504-50
  • Fabrikant Norgren
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

Mounting Bracket

Suitable for mounting Olympian® Plus units

Caution

Before commencing any maintenance, shut off the air supply and exhaust the downstream pressure. This can be done with an exhaust type ball valve.

Specificaties
Kenmerk Waarde
For Manufacturer Series F64C
12 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
10,97
(excl. BTW)
13,27
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
10,97 €
5 - 9
10,53 €
10 - 24
10,28 €
25 +
10,06 €
Related Products
The Festo EV series block shape clamping module ...
Description:
The Festo EV series block shape clamping module has a clamping area of 20mm and 75mm. This is a single-acting operation module with an M5 pneumatic connection. It has a stoke size of 5mm. Ambient temperature rating ranging between -20°C ...
The Festo sub-base set has MS series with ...
Description:
The Festo sub-base set has MS series with G thread and its size is 4. It has 2 moderate corrosion stress. Medium temperature is -10°C to 60 °Cproduct weight is 128 g.
The Festo D series distributor block has a ...
Description:
The Festo D series distributor block has a without threaded connection plates with FRB threaded pin. Size = midiAssembly position = anyCRC type = 2 (moderate corrosion stress).
The Festo D series branching module is a ...
Description:
The Festo D series branching module is a pneumatic manifold without threaded connection plates for auxiliary modules. The maximum operating pressure is 16 bar. Size = maxiNominal flow rate = 20000 l/minAssembly position = any.