ETA Mounting Base for use with 1610 Series Circuit Breaker

  • RS-stocknr. 537-2704
  • Fabrikantnummer 1610-8-WAY BASE + LID
  • Fabrikant ETA
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Mounting Base - 1610 series

Accommodates up to 8 x 1610 series circuit breakers
Voltage rating of 32Vdc
Polarised detachable lid with thumbscrew
Gasket seal between lid and base
Requires 96.5 x 27.0mm panel cut-out
6.3 x 0.8mm spade terminals
IP54 rating

Specificaties
Kenmerk Waarde
Accessory Type Mounting Base
For Use With 1610 Series Circuit Breaker
105 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
128 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
24,79
(excl. BTW)
30,00
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
24,79 €
10 - 14
23,99 €
15 +
23,19 €
Related Products
Auxiliary contact (825-6107)Indicator contact (825-6116)Undervoltage trip release (825-6119)Shunt ...
Description:
Auxiliary contact (825-6107)Indicator contact (825-6116)Undervoltage trip release (825-6119)Shunt trip release (825-6113)Rated impulse withstand voltage Uimp: 4kVAC rated operating current: 6A 230V - 3A 400VInstallation on the left side of circuit breaker.
The Silicon Labs broad range of Digital Isolation ...
Description:
The Silicon Labs broad range of Digital Isolation products offers significant improvements over older isolation technologies such as opto-couplers. They demonstrate lower power consumption, greater reliability and higher performance, and are generally smaller in size and lower in cost. These ...
Acti 9 iC60N series multi-standard circuit breakers combine ...
Description:
Acti 9 iC60N series multi-standard circuit breakers combine circuit protection against short circuit currents and circuit protection against overload currents it also protects people against indirect contact with TN and IT neutral systems. Fully compliant with standards IEC/EN 60898 and ...
A complete range of mounting and wiring accessories ...
Description:
A complete range of mounting and wiring accessories as padlock system, screw shields, plug-in base and clip on marker to facilitate all operations including on-site interventions avoiding downtime for greater continuity of service.