Unipower 80 A Motor Load Monitor, 230 V ac

  • RS-stocknr. 793-4109
  • Fabrikantnummer APM110E
  • Fabrikant Unipower
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DK
Productomschrijving

APM110E - Analogue Motor Load Monitor

The APM110E is a monitor- and protection unit for motors. The unit measures kW used by a 3-phase motor to detect machine overload or under load.
Commonly used to protect pumps, conveyors, macerators, scrapers and filtration screens.
Features output connections for the PCU D10, remote front panel display and control module.

Supply voltage from 1x 120/230 Vac
Voltage range from 3x 230-575 Vac
Programmable max. and min. kW limit detector plus the support functions
Internal current transformer for currents up to 80A
Power range max. 80 kW with internal current sensor
Auto and manual reset
DIN rail mounting
An external display (PCU D10; Stock-no.: 793-4111) can be connect via 2-wire connection

Unipower Motor Protection

Specificaties
Kenmerk Waarde
Motor Protection Component Load Monitor
Number of Inputs 3
Output 2
Sensing Type Current Transformer
Supply Voltage 230 V ac
Current Rating 80 A
Overall Length 70mm
Overall Width 86mm
Overall Depth 58mm
Minimum Operating Temperature -15°C
Maximum Operating Temperature +50°C
Size D 58 x W 70 x H 86mm
Enclosure Type Lexan UL94V-0 (Upper), Noryl UL94V-0 (Lower)
Series APM
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 16/12/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
400,18
(excl. BTW)
484,22
(incl. BTW)
Aantal stuks
Per stuk
1 +
400,18 €
Related Products
Energy logging is now within your reach—discover where ...
Description:
Energy logging is now within your reach—discover where you’re wasting energy, optimize your facility’s energy use and reduce your bill. The new Fluke 1732 Three-Phase Electrical Energy loggers introduce a new simplicity to discovering sources of electrical energy waste. Discover ...
The load power monitor achieves effective protection for ...
Description:
The load power monitor achieves effective protection for three-phase motors in critical applications, guarding against nuisance trips because of voltage fluctuations.,Reliable detection of overload or underload operating conditions is achieved by measurement of this true power. Independent settings for power ...
Can be used with all motors equipped with ...
Description:
Can be used with all motors equipped with PTC thermistor probes. It monitors windings temperature and ensures that the rated operating value is not exceeded, therefore guarding against faults which are often the cause of premature ageing. They can also ...
The PAIR module is designed for use with ...
Description:
The PAIR module is designed for use with induction motors that require protection against both overload and underload conditions. Overcurrent sensing with inverse time delay responseSensitive underload protection by power factor measurementIntegral current transformer up to 32ACurrent range can be ...