Eaton Wiring Set for use with PKZM0 + DILM17, PKZM0 + DILM25, PKZM0 + DILM32

  • RS-stocknr. 512-9982
  • Fabrikantnummer 283153 | PKZM0-XDM32
  • Fabrikant Eaton
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: DE
Productomschrijving

Plug-In Connection System

A simple clip together assembly system, used to configure a PKZM Motor Protective Circuit Breaker and xStart contactor to form either a DOL or Reversing motor starter. No additional wiring between the components is required, which speeds up assembly and prevents wiring errors. The use of this system for Motor Starters up to 5.5kW allows mounting on a single DIN rail.

Specificaties
Kenmerk Waarde
Accessory Type Wiring Set
For Use With PKZM0 + DILM17, PKZM0 + DILM25, PKZM0 + DILM32
Series PKZM
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 11/08/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
10,72
(excl. BTW)
12,97
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
10,72 €
10 - 14
10,28 €
15 +
9,84 €
Related Products
Mounted on the right hand side of a ...
Description:
Mounted on the right hand side of a 140M circuit breakerOne contact for short circuit trip indication, and one for overload / short circuit trip indication therefore allowing the differentiation between the trip conditions.
Padlock attachment used in conjunction with rotary lockable ...
Description:
Padlock attachment used in conjunction with rotary lockable handle (stock no. 351-5779) to increase the number of padlocks to three (with shaft diameters of 3 to 6mm) to lock off a 140M circuit breaker.
Used to link together the supply side of ...
Description:
Used to link together the supply side of either a 140M-C or 140M-D circuit breaker, removing the need to wire each individual breakerAvailable in three pitch lengthsBlank covers (stock No. 351-6003) are also available to cover unused supply lugs.
Parameterize CASM with brushless DC motors with just ...
Description:
Parameterize CASM with brushless DC motors with just a few clicks, using the SKF Drive Assistant (requires a Windows PC). Automatic ModeThe automatic mode allows the creation of an autonomous positioning loop without any PLC. As soon as the automatic ...