- RS-stocknr.:
- 920-6197
- Fabrikantnummer:
- L6470H
- Fabrikant:
- STMicroelectronics
- RS-stocknr.:
- 920-6197
- Fabrikantnummer:
- L6470H
- Fabrikant:
- STMicroelectronics
Datasheets
Wetgeving en conformiteit
Productomschrijving
Stepper Motor Drivers, STMicroelectronics
Fully integrated microstepping motor driver with motion engine and SPI
The L6470 device, realized in analog mixed signal technology, is an advanced fully integrated solution suitable for driving two-phase bipolar stepper motors with microstepping. It integrates a dual low RDS(on)DMOS full bridge with all of the power switches equipped with an accurate on-chip current sensing circuitry suitable for non-dissipative current control and overcurrent protection. Thanks to a unique control system, a true 1/128 steps resolution is achieved. The digital control core can generate user defined motion profiles with acceleration, deceleration, speed or target position, easily programmed through a dedicated registers set. All commands and data registers, including those used to set analogue values (i.e. current control value, current protection trip point, deadtime, PWM frequency, etc.) are sent through a standard 5-Mbit/s SPI. A very rich set of protections (thermal, low bus voltage, overcurrent, motor stall) allows the design of a fully protected application, as required by the most demanding motor control applications.
Key features
Motor Controllers & Drivers, STMicroelectronics
Specificaties
Kenmerk | Waarde |
---|---|
Motor Type | Stepper |
Output Configuration | Bipolar |
Maximum IGBT Collector Current | 3A |
Maximum Collector Emitter Voltage | 45 V |
Mounting Type | Surface Mount |
Package Type | TSSOP |
Maximum Operating Supply Voltage | 45 V |
Pin Count | 28 |
Minimum Operating Supply Voltage | 8 V |
Typical Switching Frequency | 125kHz |
Width | 4.5mm |
Height | 1.05mm |
Length | 9.8mm |
Minimum Operating Temperature | -40 °C |
Maximum Operating Temperature | +150 °C |
Dimensions | 9.8 x 4.5 x 1.05mm |