ON Semiconductor STK551U392A-E, AC Induction Motor Driver IC, 600 V 15A 29-Pin, SIP

Wetgeving en conformiteit
Land van herkomst: VN

Inverter Intelligent Power Module (IPM) in SIP Package for 3-Phase Motor Drive

Build-in Peripherals; HVIC, IGBT, FRD, Boot-Diode, Shunt Resistor, Gate Resistor and Thermistor for Inverter Circuit
Low Loss by using Low VCE(sat) High Speed IGBTs, and Soft Recovery Diodes
Temperature Detection
Noise Reduction
Reduce Surge Voltage
Single-In-Line Package (SIP) module
Applications in Air Conditioner Compressors, Refrigerators, Washing Machines, Dryers and Fan Driver

Motor Controllers & Drivers, ON Semiconductor

Kenmerk Waarde
Motor Type AC Induction
Output Configuration 3 Phase
Maximum IGBT Collector Current 15A
Maximum Output Current 20A
Maximum Collector Emitter Voltage 600 V
Mounting Type Through Hole
Package Type SIP
Maximum Operating Supply Voltage 16.5 V
Pin Count 29
Minimum Operating Supply Voltage 13.5 V
Typical Switching Frequency 20kHz
Maximum Isolation Rating 2000Vrms
Series Intelligent Power Module
Inverter Power Rating 35W
Length 62mm
Dimensions 62 x 5.7 x 21.8mm
Maximum Operating Temperature +100 °C
Minimum Operating Temperature -40 °C
Height 21.8mm
Width 5.7mm
24 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Tube of 8)
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
8 +
12,785 €
102,28 €
Related Products
High-side switches can safely drive high currents in ...
High-side switches can safely drive high currents in resistive, inductive and capacitive grounded loads. Designed to work in the harsh automotive environment they requires both robust, low on-resistance power switch and accurate analogue circuitry for diagnostic, protection and control functions. ...
The Control Integrated Power System (CIPOS) are families ...
The Control Integrated Power System (CIPOS) are families of highly integrated, compact power modules. They are designed to drive motors in home appliances, fan and pump applications. These energy-efficient Intelligent Power Modules (IPM) deliver increased power density with enhanced system ...
The device is a full bridge motor driver ...
The device is a full bridge motor driver intended for a wide range of automotive applications. The device incorporates a dual monolithic high-side driver and two low-side switches. Both switches are designed using STMicroelectronics’ well known and proven proprietary VIPower® ...
The L298 from ST is an integrated high ...
The L298 from ST is an integrated high voltage, high current Dual Full-Bridge Driver. The device is designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that ...