GertBoard Gertbot Gertbot Robotic Motor Driver Stepper Add On Board

  • RS-stocknr. 848-6806
  • Fabrikantnummer Gertbot
  • Fabrikant GertBoard
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

Gertbot Motor Control Board for Raspberry Pi

The Gertbot is an add-on board made especially for, and compatible with all versions of the Raspberry Pi. By plugging the Gertbot to your Pi GPIO header, you are able to control and drive various motors such as stepper and brushed motors. The Gertbot can also be used as a standalone board and can be controlled from any computer via a UART serial port.

Features & Benefits of the Gertbot
•64 MHz ARM Cortex-M3 processor
•Can drive 30 V and 2.5 A
•Easy to set up
•High-level commands make it easy to control
•Capacity to plug in up to 4 more boards
•Outputs are short circuit and thermal protected
•The board can be controlled without programming

Specificaties
Kenmerk Waarde
Kit Name Gertbot Robotic Motor Driver
Kit Classification Add On Board
Motor Type Stepper
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 16/01/2020, met een levertijd van 1 werkdag.
Prijs Each
54,02
(excl. BTW)
65,36
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
54,02 €
5 +
53,69 €
Related Products
The CY8CKIT-037 kit is used in conjunction with ...
Description:
The CY8CKIT-037 kit is used in conjunction with a PSoC 4 CY8CKIT-042 Pioneer kit (RS 124-4183) to evaluate DC motor control applications. The kit supports BLDC (BrushLess Direct Current) motors, PMSM (Permanent Magnetic Synchronous Motors) and Stepper motors. PSoC Creator ...
The LB1938FA is an H-bridge motor driver that ...
Description:
The LB1938FA is an H-bridge motor driver that supports low-voltage drive and features low-saturation outputs in an ultra-miniature slim package. The LB1938FA provides forward, reverse, brake, and standby modes controlled by two input signals, and is an optimal DC motor ...
The NCV7718 is a Hex Half-Bridge Driver with ...
Description:
The NCV7718 is a Hex Half-Bridge Driver with protection features designed specifically for automotive and industrial motion control applications. The NCV7718 has independent controls and diagnostics. The device can be operated in forward, reverse, brake, and high impedance states. The ...
xChips are a rapid electronics development ecosystem to ...
Description:
xChips are a rapid electronics development ecosystem to help reduce development time and simplify making custom products as well as aiding learning. Without soldering, wiring, breadboarding, or hardware knowledge you can assemble a circuit in minutes, and concentrate on coding.xChips ...