STEVAL-IHM029V2, Motor Control Dev Kit

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

The STEVAL-IHM029V2 is a low-cost universal motor control evaluation board designed for the home appliance market, with particular focus on vacuum cleaners, food processors and power tools. This system features the 20-pin, 8-bit STM8S103F2 microcontroller running at 16 MHz (user-trimmable internal RC clock), featuring 4 KB of Flash memory, a 10-bit A/D converter, 8/16 bit timers, communication interfaces and 640 bytes of E2PROM. The power supply circuitry features the VIPer16L, an off-line converter with an 800 V avalanche-rugged power section, operating at 60 kHz. The STEVAL-IHM029V2 especially targets vacuum cleaner applications with power up to 900 W. The motor control is based on phase-angle.
In order to limit in-rush current and possible current peaks, the evaluation board features a soft-start routine and a smooth power change function. In standby mode, the STEVAL-IHM029V2 has an overall power consumption below 300 mW.

Specificaties
Kenmerk Waarde
Kit Name Universal Motor Control Evaluation Board
Kit Classification Evaluation Board
For Use With Food Processors, Home Appliance Market with Particular Focus on Vacuum Cleaners, Power Tools
Featured Device STM8S103F2, T1235T
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
96,74
(excl. BTW)
117,06
(incl. BTW)
Aantal stuks
Per stuk
1 +
96,74 €
Related Products
The TimeFlash programmer allows users to rapidly program ...
Description:
The TimeFlash programmer allows users to rapidly program Microchip’s field programmable MEMS oscillator to a custom frequency in seconds, minimizing design time by enabling fast prototyping and testing. Our MEMS oscillators are available in industry standard packages that are drop-in ...
The Renesas DISPLAY IT Human Machine Interface (HMI) ...
Description:
The Renesas DISPLAY IT Human Machine Interface (HMI) solution has a Graphical User Interface (GUI) that accommodates the 32-bit RX600 Microcontroller family. The unit incorporates the exDMA peripheral allowing it to drive a TFT. The HMI Solution Kit Enables straightforward ...
4 Kbit and 16 Kbit I²C serial EERAM ...
Description:
4 Kbit and 16 Kbit I²C serial EERAM devicesFollows the published recommended capacitor selection for the EERAM deviceTest points with probe loops for SCL, SDA, VCC and GNDOn-board pull-ups for I²C bus operationSMD jumper options for 3.3V and 5V operationOn-board ...
The STEVAL-FCU001V1 is designed to support quadcopter drone ...
Description:
The STEVAL-FCU001V1 is designed to support quadcopter drone designers. A complete sample FW project allows the designer to begin flying small and medium size quadcopters (with brushed or brushless DC motors) immediately and evaluate the performance of the IMU sensors ...