ON Semiconductor LV8402GPEVB Motor Driver IC Evaluation Board DC Evaluation Board for LV8402GP-H, LV8402GP-TE-L-H

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

The LV8402GP is a 2ch forward/reverse motor driver IC using D-MOS FET for its output stage. As MOS circuit is used, it supports the PWM input. It also provides protection functions such as heat protection circuit and reduced voltage detection and is optimal for the motors that need high-current.

2ch forward/reverse motor driver
Built-in low voltage reset and thermal shutdown circuit
Low power consumption
4 mode function forward/reverse, brake and standby
Low-ON resistance 0.75(Ohm)
Built-in charge pump
Built-in EXTRA mode for PWM port reduction when a motor drives by two phase excitation

Specificaties
Kenmerk Waarde
Kit Name Motor Driver IC Evaluation Board
Kit Classification Evaluation Board
For Use With 2-Channel Forward/Reverse Motor Drive
Motor Type DC
Featured Device LV8402GP-H, LV8402GP-TE-L-H
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 09/06/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
40,16
(excl. BTW)
48,59
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
40,16 €
5 +
39,15 €
Related Products
The Silicon Laboratories Si5XX-PROG-EVB circuit board evaluates any ...
Description:
The Silicon Laboratories Si5XX-PROG-EVB circuit board evaluates any frequency I2C programmable crystal oscillators/Voltage control crystal oscillators; Si514; Si570; Si571; Si598 and Si599. Kit contains the hardware and software and EVB driver (USBXpress®)Supported frequency: 100 kHz to 1417MHzAdjusting VDD ...
The Si5341-EVB evaluation board is designed to evaluate ...
Description:
The Si5341-EVB evaluation board is designed to evaluate the Si5341 Jitter Attenuating Clock Multiplier with Multisynth™ technology, allowing for a smooth transition from Clockbuilder Pro device configuration to performance evaluation. On-board SMA connectors allow for measurement via independent input and ...
The X-NUCLEO-OUT01A1 is an Industrial Digital output expansion ...
Description:
The X-NUCLEO-OUT01A1 is an Industrial Digital output expansion board based on ISO8200BQ for STM32 Nucleo boards.It provides an affordable and easy-to-use solution involving galvanic insulation embedded in industrial power switch driver applications. The Arduino™ UNO R3 connector compatibility allows to ...
The Digilent Zybo Z7-20 development kit is a ...
Description:
The Digilent Zybo Z7-20 development kit is a feature-rich, ready-to-use embedded software and digital circuit board built around the Xilinx Zynq-7000 family. The Zynq family is based on the Xilinx All Programmable System-on-Chip (AP SoC) architecture that tightly integrates a ...