STMicroelectronics X-NUCLEO-IHM11M1 Motor Configuration BLDC Expansion Board for STSPIN230 for STM32 Nucleo

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

X-NUCLEO-IHM11M1 BLDC Motor Driver Expansion Board

The X-NUCLEO-IHM11M1 is a low-voltage three-phase brushless DC (BLDC) motor driver expansion board based on the STSPIN230 triple half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in battery life.

• Operating voltage range: +1.8 to +10Vdc • Output current: 1.3Arms
• Current control with adjustable off-time
• Standby consumption: <80nA
• Non-dissipative over-current detection and protection
• Over-temperature protection
• Interlocking function
• Hall/Encoder motor sensor connector and circuit
• 3 x Output activity LEDs
• Fault LED
• Potentiometer for manual speed control
• Screw terminals for motor signals and power supply
• ST morpho connectors for host MCU board
• Arduino Uno r3 compatible Shield headers
• Compatible with STM32 Nucleo MCU boards
• Compatible with ST Six Step or ST FOC control algorithms

Motor Controllers & Drivers, STMicroelectronics

Specificaties
Kenmerk Waarde
Kit Name Motor Configuration
Kit Classification Expansion Board
For Use With STM32 Nucleo
Motor Type BLDC
Featured Device STSPIN230
16 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
8,95
(excl. BTW)
10,83
(incl. BTW)
Aantal stuks
Per stuk
1 +
8,95 €
Related Products
The STEVAL-IPMNG3Q is a compact 3-phase ac motor ...
Description:
The STEVAL-IPMNG3Q is a compact 3-phase ac motor driver board based on a SLLIMM™-nano (Small Low-Loss Intelligent Moulded Module) 2nd series device. It is designed for driving high-power motors in a wide range of applications such as white goods, air-conditioning, ...
The STEVAL-IPM08B compact motor drive power board is ...
Description:
The STEVAL-IPM08B compact motor drive power board is based on SLLIMM™ (small low-loss intelligent molded module) 2nd series module ( STGIB8CH60TS-L). It provides an affordable and easy-to-use solution for driving high power motors in a wide range of applications such ...
The LV8713T is a microstepping motor driver IC ...
Description:
The LV8713T is a microstepping motor driver IC with built-in translator for easy operation. It supports full-step, half-step, 1/16-step, and 1/32-step resolution. The LV8713T is optimal for driving stepping motor of scanner and small printer. Single-channel PWM constant-current control stepping ...
The LV8741V is a 2-channel H-bridge driver IC ...
Description:
The LV8741V is a 2-channel H-bridge driver IC that can switch a stepping motor driver, which is capable of micro-step drive and supports Full-step, Half-step (full torque), Half-step, and Quarter-step resolution, and two channels of a brushed motor driver, which ...